Owner's Manual - Roland

Effects ListParameter Value DescriptionTypeROOM1,ROOM2,STAGE1,STAGE2,HALL1, HALL2Type of reverbROOM1: dense reverb withshort decayROOM2: sparse reverb withshort decaySTAGE1: reverb with greaterlate reverberationSTAGE2: reverb with strongearly reflectionsHALL1: reverb with clear reverberanceHALL2: reverb with rich reverberancePre Delay 0.0–100.0 ms Adjusts the delay time from the directsound until the reverb soundis heard.Time # 0–127 Time length of reverberationHF Damp65: GATED REVERBThis is a special type of reverb in which the reverberant sound is cutoff before its natural length.fig.MFX-65200–8000 Hz,BYPASSAdjusts the frequency abovewhich the reverberant sound willbe cut.As the frequency is set lower,more of the high frequencieswill be cut, resulting in a softerand more muted reverberance.If you do not want to cut thehigh frequencies, set this parameterto BYPASS.Low Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeBalance # D100:0W–D0:100WVolume balance between the directsound (D) and the reverb sound(W)Level 0–127 Output LevelL inR inBalance DGated ReverbBalance D2-BandEQBalance WBalance W2-BandEQL outR outParameter Value DescriptionTypeNORMAL, REVERSE,SWEEP1, SWEEP2Type of reverbNORMAL: conventionalgated reverbREVERSE: backwards reverbSWEEP1: the reverberantsound moves from right toleftSWEEP2: the reverberantsound moves from left torightPre Delay 0.0–100.0 ms Adjusts the delay time fromthe direct sound until the reverbsound is heard.Gate Time 5–500 ms Adjusts the time from whenthe reverb is heard until itdisappears.Low Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeBalance # D100:0W–D0:100W Volume balance between thedirect sound (D) and the reverbsound (W)Level # 0–127 Output Level66: OVERDRIVE → CHORUSfig.MFX-66L inR inParameter Value DescriptionOverdriveDrive #0–127 Degree of distortionAlso changes the volume.OverdrivePan #L64–63RStereo location of the overdrivesoundChorus PreDelay0.0–100.0 ms Adjusts the delay time from thedirect sound until the chorussound is heard.Chorus Rate # 0.05–10.00 Hz, note Frequency of modulationChorus Depth 0–127 Depth of modulationChorusBalance #67: OVERDRIVE → FLANGERfig.MFX-67D100:0W–D0:100WLevel 0–127 Output LevelL inR inAdjusts the volume balance betweenthe sound that is sentthrough the chorus (W) and thesound that is not sent throughthe chorus (D).Parameter Value DescriptionOverdriveDrive #0–127 Degree of distortionAlso changes the volume.OverdrivePan #L64–63RStereo location of the overdrivesoundFlanger PreDelay0.0–100.0 ms Adjusts the delay time fromwhen the direct sound beginsuntil the flanger sound is heard.Flanger Rate # 0.05–10.00 Hz, note Frequency of modulationFlanger Depth 0–127 Depth of modulationFlangerFeedback #FlangerBalance #OverdriveOverdriveBalance DChorusBalance DBalance DFeedbackFlangerBalance D-98– +98 % Adjusts the proportion of theflanger sound that is fed backinto the effect. Negative (-) settingswill invert the phase.D100:0W–D0:100W Adjusts the volume balance betweenthe sound that is sentthrough the flanger (W) and thesound that is not sent throughthe flanger (D).Level 0–127 Output LevelL outBalance WBalance WR outL outBalance WBalance WR out289