Owner's Manual - Roland

Effects List61: PITCH SHIFTER(Feedback Pitch Shifter)A stereo pitch shifter.fig.MFX-61L inR inParameter Value DescriptionCoarse #1 -24– +12 semi Adjusts the pitch of the pitchshifted sound in semitone steps.Fine #1 -100– +100 cent Adjusts the pitch of the pitchshifted sound in 2-cent steps.Delay Time 0–1300 ms, note Adjusts the delay time from thedirect sound until the pitch shiftedsound is heard.Feedback # -98– +98 % Adjusts the proportion of thepitch shifted sound that is fedback into the effect. Negative (-)settings will invert the phase.Low Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeBalance #62: 2VOICE PITCH SHIFTERShifts the pitch of the original sound. This 2-voice pitch shifter hastwo pitch shifters, and can add two pitch shifted sounds to theoriginal sound.fig.MFX-62D100:0W–D0:100WLevel 0–127 Output LevelL inR inPitch ShifterPitch ShifterLevel 1Pan 1 R2Voice Pitch ShifterPan 2 LLevel 12-Band EQ2-Band EQL outR outVolume balance between the directsound (D) and the pitchshifted sound (W)Balance DPan 1 LPan 2 RBalance DL outBalance WBalance WR outParameter Value DescriptionPitch 1:Coarse #1-24-+12 semi Adjusts the pitch of Pitch Shift 1in semitone steps.Pitch 1:Fine #1 -100-+100 cent Adjusts the pitch of Pitch ShiftPitch 1 in 2-cent steps.Pitch 1:Delay 0–1300 ms, note Adjusts the delay time from thedirect sound until the Pitch Shift1 sound is heard.Pitch 1:Feedback#-98– +98 % Adjusts the proportion of thepitch shifted sound that is fedback into the effect. Negative (-)settings will invert the phase.Pitch 1:Pan # L64-63R Stereo location of the Pitch Shift 1soundPitch 1:Level 0–127 Volume of the Pitch Shift1 soundPitch 2:Coarse #2Pitch 2:Fine #2-24-+12 semi-100-+100 centSettings of the Pitch Shift 2sound.The parameters are the same asPitch 2:Delay 0–1300 ms, note for the Pitch Shift 1 sound.Pitch 2:Feedback-98– +98 %#Pitch 2:Pan # L64-63RPitch 2:Level 0–127Low Gain -15– +15 dB Gain of the low rangeParameter Value DescriptionHigh Gain -15– +15 dB Gain of the high rangeLevel Balance A100:0B-A0:100B Volume balance between thePitch Shift 1 and Pitch Shift 2soundsBalance D100:0W-D0:100W Volume balance between the directsound (D) and the pitchshifted sound (W)Level 0-127 Output Level63: STEP PITCH SHIFTERA pitch shifter in which the amount of pitch shift is varied by a 16-step sequence.fig.MFX-63L inR inParameter Range ExplanationStep 01–16 -24–+12 semi Amount of pitch shift at eachstep (semitone units)Rate # 0.05–10.00 Hz, note Rate at which the 16-step sequencewill cycleAttack # 0–127 Speed at which the amount ofpitch shift changes betweenstepsGate Time # 0–127 Duration of the pitch shiftedsound at each stepFine -100– +100 cent Pitch shift adjustment for allsteps (2-cent units)Delay Time 0–1300 ms, note Delay time from the originalsound until the pitch-shiftedsound is heardFeedback # -98– +98% Proportion of the pitch-shiftedsound that is to be returnedto the input (negative valuesinvert the phase)Low Gain -15– +15 dB Amount of boost/cut for thelow-frequency rangeHigh Gain -15– +15 dB Amount of boost/cut for thehigh-frequency rangeBalance # D100:0W–D0:100W Volume balance of the originalsound (D) and pitch-shiftedsound (W)Level 0–127 Output volume64: REVERBAdds reverberation to the sound, simulating an acoustic space.fig.MFX-64L inR inStep Pitch ShifterStep Pitch ShifterBalance DReverbBalance D2-BandEQBalance WBalance W2-BandEQ2-BandEQ2-BandEQL outR outL outR out288