12.07.2015 Views

Owner's Manual - Roland

Owner's Manual - Roland

Owner's Manual - Roland

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Effects List33: 2BAND FLANGERA flanger that lets you apply an effect independently to the lowfrequencyand high-frequency ranges.fig.MFX-33L inL outHigh Band FlangerSplit High Band FeedbackLow Band FlangerLow Band FeedbackHigh Band Feedback34: 2BAND STEP FLANGERA step flanger that lets you apply an effect independently to the lowfrequencyand high-frequency ranges.fig.MFX-34L inL outHigh Band Step FlangerSplitHigh Band FeedbackLow Band Step FlangerLow Band FeedbackHigh Band FeedbackHigh Band FlangerHigh Band Step FlangerSplitLow Band FeedbackSplitLow Band FeedbackR inLow Band FlangerR outR inLow Band Step FlangerR outParameter Range ExplanationSplit Freq 200–8000 Hz Frequency at which the lowand high ranges will be dividedLow Pre Delay 0.0–100.0 ms Delay time from when theoriginal sound is heard towhen the low-range flangersound is heardLow Rate # 0.05–10.00 Hz, note Rate at which the low-rangeflanger sound is modulatedLow Depth 0–127 Modulation depth for the lowrangeflanger soundLow Phase 0–180 deg Spaciousness of the low-rangeflanger soundLowFeedback #-98– +98% Proportion of the low-rangeflanger sound that is to be returnedto the input (negativevalues invert the phase)High Pre Delay 0.0–100.0 ms Delay time from when theoriginal sound is heard towhen the high-range flangersound is heardHigh Rate # 0.05–10.00 Hz, note Rate at which the high-rangeflanger sound is modulatedHigh Depth 0–127 Modulation depth for thehigh-range flanger soundHigh Phase 0–180 deg Spaciousness of the highrangeflanger soundHighFeedback #-98– +98% Proportion of the high-rangeflanger sound that is to be returnedto the input (negativevalues invert the phase)Balance # D100:0W–D0:100W Volume balance of the originalsound (D) and flangersound (W)Level 0–127 Output volumeParameter Range ExplanationSplit Freq 200–8000 Hz Frequency at which the lowand high ranges will be dividedLow Pre Delay 0.0–100.0 ms Delay time from when theoriginal sound is heard towhen the low-range flangersound is heardLow Rate # 0.05–10.00 Hz, note Rate at which the low-rangeflanger sound is modulatedLow Depth 0–127 Modulation depth for the lowrangeflanger soundLow Phase 0–180 deg Spaciousness of the low-rangeflanger soundLowFeedback #Low StepRate #-98– +98% Proportion of the low-rangeflanger sound that is to be returnedto the input (negativevalues invert the phase)0.10–20.00 Hz, note Rate at which the steps willcycle for the low-rangeflanger soundHigh Pre Delay 0.0–100.0 ms Delay time from when theoriginal sound is heard towhen the high-range flangersound is heardHigh Rate # 0.05–10.00 Hz, note Rate at which the high-rangeflanger sound is modulatedHigh Depth 0–127 Modulation depth for thehigh-range flanger soundHigh Phase 0–180 deg Spaciousness of the highrangeflanger soundHighFeedback #High StepRate #-98– +98% Proportion of the high-rangeflanger sound that is to be returnedto the input (negativevalues invert the phase)0.10–20.00 Hz, note Rate at which the steps willcycle for the high-rangeflanger soundBalance # D100:0W–D0:100W Volume balance of the originalsound (D) and flangersound (W)Level 0–127 Output volume280

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!