Owner's Manual - Roland

Effects List23: CHORUSThis is a stereo chorus. A filter is provided so that you can adjust thetimbre of the chorus sound.fig.MFX-23L inR inParameter Value DescriptionFilter Type OFF, LPF, HPF Type of filterOFF: no filter is usedLPF: cuts the frequency rangeabove the Cutoff FreqHPF: cuts the frequency rangebelow the Cutoff FreqCutoff Freq 200–8000 Hz Basic frequency of the filterPre Delay 0.0–100.0 ms Adjusts the delay time from thedirect sound until the chorussound is heard.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationPhase 0–180 deg Spatial spread of the soundLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeBalance #24: FLANGERThis is a stereo flanger. (The LFO has the same phase for left andright.) It produces a metallic resonance that rises and falls like a jetairplane taking off or landing. A filter is provided so that you canadjust the timbre of the flanged sound.fig.MFX-24D100:0W–D0:100WLevel 0–127 Output LevelL inChorusChorusFlangerBalance DFeedbackFeedbackBalance DBalance DBalance WBalance W2-BandEQ2-BandEQL outR outVolume balance between the directsound (D) and the chorussound (W)2-BandEQBalance WL outParameter Value DescriptionHigh Gain -15– +15 dB Gain of the high rangeBalance # D100:0W–D0:100WVolume balance between the directsound (D) and the flangersound (W)Level 0–127 Output Level25: STEP FLANGERThis is a flanger in which the flanger pitch changes in steps. Thespeed at which the pitch changes can also be specified in terms of anote-value of a specified tempo.fig.MFX-25L inR inStep FlangerFeedbackFeedbackBalance DStep FlangerBalance D2-BandEQBalance WBalance W2-BandEQL outR outParameter Value DescriptionFilter Type OFF, LPF, HPF Type of filterOFF: no filter is usedLPF: cuts the frequencyrange above the Cutoff FreqHPF: cuts the frequencyrange below the Cutoff FreqCutoff Freq 200–8000 Hz Basic frequency of the filterPre Delay 0.0–100.0 ms Adjusts the delay time fromwhen the direct sound beginsuntil the flanger sound isheard.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationPhase 0–180 deg Spatial spread of the soundFeedback # -98– +98 % Adjusts the proportion of theflanger sound that is fed backinto the effect. Negative (-) settingswill invert the phase.Step Rate # 0.10–20.00 Hz, note Rate (period) of pitch changeLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeBalance # D100:0W–D0:100W Volume balance between thedirect sound (D) and theflanger sound (W)Level 0–127 Output LevelFlangerBalance WR inBalance D2-BandEQR outParameter Value DescriptionFilter Type OFF, LPF, HPF Type of filterOFF: no filter is usedLPF: cuts the frequency rangeabove the Cutoff FreqHPF: cuts the frequency rangebelow the Cutoff FreqCutoff Freq 200–8000 Hz Basic frequency of the filterPre Delay 0.0–100.0 ms Adjusts the delay time fromwhen the direct sound beginsuntil the flanger sound is heard.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationPhase 0–180 deg Spatial spread of the soundFeedback # -98– +98 % Adjusts the proportion of theflanger sound that is fed backinto the effect. Negative (-) settingswill invert the phase.Low Gain -15– +15 dB Gain of the low range277