Owner's Manual - Roland

Effects List11: PHASERA phase-shifted sound is added to the original sound andmodulated.fig.MFX-11L inR inParameter Value DescriptionMode 4-STAGE, 8- Number of stages in the phaserSTAGE, 12-STAGEManual # 0–127 Adjusts the basic frequency fromwhich the sound will be modulated.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationPolarity INVERSE,SYNCHROSelects whether the left and rightphase of the modulation will bethe same or the opposite.INVERSE: The left and rightphase will be opposite. Whenusing a mono source, thisspreads the sound.SYNCHRO: The left and rightphase will be the same. Selectthis when inputting a stereosource.Resonance # 0–127 Amount of feedbackCrossFeedback12: STEP PHASERThe phaser effect will be varied gradually.fig.MFX-12PhaserPhaserMixMix2-BandEQ2-BandEQL outR out-98– +98 % Adjusts the proportion of thephaser sound that is fed backinto the effect. Negative (-) settingswill invert the phase.Mix # 0–127 Level of the phase-shifted soundLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeLevel 0–127 Output LevelL inR inStep PhaserStep PhaserMixMix2-BandEQ2-BandEQL outR outParameter Value DescriptionCrossFeedback-98– +98 % Adjusts the proportion of thephaser sound that is fed backinto the effect. Negative (-) settingswill invert the phase.Step Rate # 0.10–20.00 Hz, note Rate of the step-wise change inthe phaser effectMix # 0–127 Level of the phase-shifted soundLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeLevel 0–127 Output Level13: MULTI STAGE PHASERExtremely high settings of the phase difference produce a deepphaser effect.fig.MFX-13L inR inParameter Value DescriptionMode 4-STAGE, 8- Number of phaser stagesSTAGE,12-STAGE, 16-STAGE, 20-STAGE, 24-STAGEManual # 0–127 Adjusts the basic frequency fromwhich the sound will be modulated.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationResonance # 0–127 Amount of feedbackMix # 0–127 Level of the phase-shifted soundPan # L64–63R Stereo location of the outputsoundLow Gain -15– +15 dB Gain of the low rangeHigh Gain -15– +15 dB Gain of the high rangeLevel 0–127 Output Level14: INFINITE PHASERA phaser that continues raising/lowering the frequency at which thesound is modulated.fig.MFX-14L inR inMulti StagePhaserResonanceInfinite PhaserMix2-BandEQ2-Band EQL outPan LPan RR outL outPan LPan RR outParameter Value DescriptionMode 4-STAGE, 8- Number of stages in the phaserSTAGE, 12-STAGEManual # 0–127 Adjusts the basic frequency fromwhich the sound will be modulated.Rate # 0.05–10.00 Hz, note Frequency of modulationDepth 0–127 Depth of modulationPolarity INVERSE,SYNCHROSelects whether the left and rightphase of the modulation will bethe same or the opposite.INVERSE: The left and rightphase will be opposite. Whenusing a mono source, thisspreads the sound.SYNCHRO: The left and rightphase will be the same. Selectthis when inputting a stereosource.Resonance # 0–127 Amount of feedbackParameter Range ExplanationMode 1, 2, 3, 4 Higher values will produce adeeper phaser effect.Speed # -100– +100 Speed at which to raise or lowerthe frequency at which the soundis modulated(+: upward / -: downward)Resonance # 0–127 Amount of feedbackMix # 0–127 Volume of the phase-shiftedsoundPan # L64–63R Panning of the output soundLow Gain -15– +15 dB Amount of boost/cut for thelow-frequency rangeHigh Gain -15– +15 dB Amount of boost/cut for thehigh-frequency rangeLevel 0–127 Output volume274