Owner's Manual - Roland

Various Performance FeaturesControl PedalIf an optional expression pedal or pedal switch (EV-5, DP-2.) is connected to the rear panelPEDAL CONTROL jack, you can use the pedal to control the volume or various function.fig.02-011Transpose (Trans)You can transpose the pitch of the keyboard in semitone steps, over a range of G–F# (-5– +6semitones) by adjusting the Transpose parameter’s value.Press [CURSOR] to move the cursor to “Trans” in the upper part of the screen, and turn theVALUE dial or press [INC] or [DEC] to change its setting.fig.02-012RolandThe way in which the soundchanges will depend on thesettings. For details on settingsfor parameters controlled bythe pedal, refer to “MakingControl Pedal Settings”(“Making Control PedalSettings” (p. 126)).Use only the specifiedexpression pedal or pedalswitch (EV-5, DP-2; soldseparately). By connecting anyother expression pedals, yourisk causing malfunction and/or damage to the unit.For details, refer to“Transposing the Keyboard inOctave Units (Octave Shift)”(“Transposing the Keyboardin Octave Units (OctaveShift)” (p. 45)).25