Owner's Manual - Roland

About V-LINKWhat is V-LINK?V-LINK () is a function that allows music and images tobe performed together. By using MIDI to connect two or more V-LINKcompatible devices, you can easily enjoy performing a wide range of visualeffects that are linked to the expressive elements of a music performance.(Examples)By using the Fantom-X and Edirol DV-7PR together, you can:• Make Edirol DV-7PR playback settings remotely from theFantom-X.• Use the Fantom-X’s sequencer to enjoy synchronized music andvideo.• Use the Fantom-X to switch the Edirol DV-7PR’s images (clips/palettes).• Use the Fantom-X’s knobs to adjust the brightness or color ofthe image.Turning the V-LINK ON/OFF1. In the left of the panel, press [V-LINK] so the indicator islighted.The V-LINK setting will be on.In this state, you can operate the Fantom-X to manipulateimages in sync with your performance.Each mode will function as usual even if V-LINK is on.2. Press [V-LINK] again.The V-LINK button will go out, and the V-LINK setting will beoff.* In order to use V-LINK with the Fantom-X and Edirol DV-7PR, you willneed to make connections using an Edirol UM1/UM-1S (sold separately).Connection ExamplesUse a UM-1 to connect the Fantom-X’s MIDI OUT connector to theDV-7PR’s remote jack.Before connecting this unit to other devices, turn off the powerto all units. This will help prevent malfunctions and/or damageto speakers or other devices.fig.29-001.eFantom-XV-LINK Settings1. Holding down [SHIFT] and pressing [V-LINK] to access theV-LINK SETUP screen.2. Press [CURSOR] to move the cursor to a parameter, andturn the VALUE dial or use [INC][DEC] to set the value.fig.29-002_50MIDI OUT* Specify the Pad Mode by pressing [F1 (Clip)] or [F2 (Palett)].3. If you want to keep your settings, press [F8 (System Write)].Edirol UM-14. Press [F7 (Exit)] or [EXIT].You’re returned to the previous screen.REMOTEEdirol DV-7PRProjectorDisplay238