Owner's Manual - Roland

Data Management FunctionsReset to Default Factory Settings (Factory Reset)Basic Procedure1. Press [MENU].2. Press or to select “Utility.”3. Press [ENTER].The Utility menu screen will appear.fig.26-001_50Fantom-X backup data must not be used to perform a Restoreinto other models in the Fantom-X series (i.e., models other thanthe Fantom-X6/X7/X8).Restoring User Data that YouBacked Up (User Restore)Here’s how user data saved on a memory card by the User Backupoperation can be reloaded back into the user memory of the Fantom-X.When you execute User Restore, the current contents of the user areawill be completely erased.1. Into the slot, insert the memory card on which user data hasbeen saved.2. In the Utility screen, press [F2 (User Restre)].A message will ask you for confirmation.4. Press [F1]–[F4] to select the operation that you want toexecute.• [F1 (User Backup)]Save user data to a memory card.• [F2 (User Restre)]Load user data from a memory card.• [F3 (Factry Reset)]Restore the factory settings.• [F4 (Librarian)]When you want to use the included Fantom-X Librariansoftware, or when you want to receive system exclusivemessages from an external device to rewrite the user memory,press [F4 (Librarian)] to put the Fantom-X in Librarian mode.* For details on using Fantom-X Librarian, refer to “Using Fantom-XLibrarian” (p. 236).Backing Up User Data(User Backup)Here’s how all user data in the user area can be saved on a memorycard.The following user data will be saved.• Performances • Rhythm Groups • Arpeggio styles• Patches • Multisamples • Chord forms• Rhythm sets • Songs • System settings• Rhythm Patterns • Samples* You need to have a sufficient amount of free space available on the memorycard in order to perform a User Backup; up to 64 MB may be required.1. Insert a memory card into the slot.2. In the Utility screen, press [F1 (User Backup)].A message will ask you for confirmation.3. To execute the backup, press [F8 (Exec)].* To cancel, press [F7 (Cancel)].3. To proceed with the restoration, press [F8 (Exec)].* To cancel, press [F7 (Cancel)].4. When the display indicates “Please Power Off,” turn thepower off, then on again.If you have added files to the Fantom-X's internal memory (suchas the TMP folder) after executing the User Backup operation,the "User Area Full!!" message may appear when you attempt toexecute the User Restore operation, and the Restore may not besuccessful. If this occurs, delete the files you added after thebackup (p. 224), and then try the Restore operation again.Factory ResetThis restores all data in the Fantom-X to the factory-set condition(Factory Reset).If there is important data you’ve created that’s stored in theFantom-X’s User memory, all such data is discarded when aFactory Reset is performed (the data of the internal usermemory will be lost). If you want to keep the existing data,save it on a memory card (p. 235) or save it via USB to yourcomputer (Using Fantom-X Librarian (p. 236)).1. Press [MENU] to open the Menu window.2. Press or to select “Utility,” and then press[ENTER].3. Press [F3 (Factry Reset)].A message will ask confirmation.4. Press [F8 (Exec)] to execute the Factory Reset.* To cancel, press [F7 (Cancel)].5. When the display indicates “Please Power Off,” turn thepower off, then on again.235