Owner's Manual - Roland

Settings Common to All Modes (System Function)Start upSystem InformationLoad Preset Samples at StartupSpecifies whether the preset samples will be loaded into memory atpower-on (ON) or not (OFF).Value: OFF, ONLoad User Samples at StartupSpecifies whether the samples of the user area and memory card willbe loaded into memory at power-on (ON) or not (OFF).Value: OFF, ONLoad Demo Song at StartupSpecifies whether the demo song will be loaded into the temporaryarea when you power up the Fantom-X (ON), or will not be loaded(OFF).Rec Track Select (Recording Track Select)For details on the indicating, refer to “How to Make SystemFunction Settings” (p. 225).FeaturesDisplays the main features of the Fantom-X.Memory Info (Memory Information)Displays the amount of memory installed.SRX Info (SRX Information)Displays the name of the wave expansion board that is installed.Version Info (Version Information)Displays the version of the Fantom-X.This specifies whether track selection will be automatic or manualwhen recording on the sequencer.ValueManual: You’ll be able to select the track number manually. Thisis convenient when you want to record a performancethat consists of more than one channel.Auto: The phrase track of the same number as the current partwill be selected automatically. This is convenient whenyou want to record only one channel in a track.Power Up ModeThis setting allows you to choose the mode that you want theFantom-X to be in when it is powered up.ValuePATCH:The Fantom-X will be in Patch mode when youturn on the power.PERFORMANCE: The Fantom-X will be in Performance modewhen you turn on the power.234