Owner's Manual - Roland

Settings Common to All Modes (System Function)Soft Through (Soft Through Switch)Thru function re-transmits all messages received at the MIDI INconnector to the MIDI OUT connector without modifying them inany way.Value: OFF, ONRemote Keyboard Sw (Remote KeyboardSwitch)Set this parameter “ON” when you want to use an external MIDIkeyboard instead of the Fantom-X’s keyboard. In this case, the MIDItransmit channel of the external MIDI keyboard can be set to anychannel. Normally you will leave this parameter “OFF.”Value: OFF, ONTurn this “ON” when you want to control the Fantom-X froman external MIDI device when performing with the Arpeggio orRPS function.Receive Program Change (Receive ProgramChange Switch)Specifies whether Program Change messages will be received (ON)or not (OFF).Value: OFF, ONReceive Bank Select (Receive Bank SelectSwitch)USBUSB ModeSelects the mode in which the USB connector will be used.Value:Storage: Storage mode. Select this if you want to transfer files.MIDI: MIDI mode. Select this if you want to exchange MIDImessages with a sequencer or other program.You must switch the USB Mode before you connect the Fantom-X to your computer via the USB cable. If you change this settingwhile the Fantom-X is connected, the computer may fail torecognize it correctly.For details on connections to your computer in each USB Mode,refer to “Connections” (p. 219)USB-MIDI Thru Sw (USB-MIDI Thru Switch)When USB Mode is set to “MIDI,” this switch specifies whetherMIDI messages received at the MIDI connector will be retransmittedfrom the MIDI OUT connector (ON) or not (OFF).Value: OFF, ONSpecifies whether Bank Select messages will be received (ON) or not(OFF).Value: OFF, ONReceive Exclusive (Receive System ExclusiveSwitch)Specifies whether System Exclusive messages will be received (ON)or not (OFF).Value: OFF, ONReceive GM System On (Receive GM SystemOn Switch)Specifies whether General MIDI System On messages will bereceived (ON) or not (OFF).Value: OFF, ONReceive GM2 System On (Receive GM2 SystemOn Switch)Specifies whether General MIDI 2 System On messages will bereceived (ON) or not (OFF).Value: OFF, ONReceive GS Reset (Receive GS Reset Switch)Specifies whether GS Reset messages will be received (ON) or not(OFF).Value: OFF, ON231