Owner's Manual - Roland

Connecting to Your Computer via USB (USB Mode)Transferring Files to or fromYour Computer (Storage Mode)By connecting the Fantom-X with your computer via a USB cable,you can transfer files from Internal user area or a memory card toand from the hard disk or other media of your computer, in order toback up your data.You can use software on your computer to edit wave data you’vecreated on the Fantom-X. Conversely, wave data that you’ve createdon your computer can be used on the Fantom-X.In this way, USB Storage mode lets you transfer files such as patchand waves to or from a connected computer.Connect or disconnect the USB cable only when the Fantom-X ispowered-off. Never connect or disconnect the USB cable or turnoff the power while in USB mode or while data is beingtransferred.Specify the Connection-DestinationWhen the Fantom-X is connected to your computer, you can selectthe area on the Fantom-X to which a connection is to be made; eitherthe internal user area or the memory card.1. Press [MENU].2. Press or to select “USB,” and then press [ENTER].The USB screen will appear.* If USB is not set to Storage mode, a warning of “The USB is in MIDIMode!!” will appear when you press [ENTER] in step 2. Press [F8(Exec)] if you want to switch to USB Storage mode (the USB settingsscreen will appear). If you decide to cancel, press [F7 (Cancel)].fig.23-001_50Connections1. With the Fantom-X not connected, start up your computer.2. Use a USB cable to connect the Fantom-X to yourcomputer.3. Turn on the power (POWER switch) of the Fantom-X.3. Press [F3 (Internal)] or [F6 (Memory Card)] to connect withyour computer.[F3 (Internal)]: Connect to the user memory[F6 (Memory Card)]: Connect to the memory card* To cancel the connection, press [Exit].4. The display will differ as follows, depending on thecomputer you’re using.• Windows Me/2000 usersA drive named “Removable disk” will be displayed within MyComputer.Below that drive there will be folders named “ROLAND” and “TMP.”• Windows XP usersA drive named “FANX USER” will be displayed within MyComputer. If a memory card is connected, its volume name willbe displayed.Below that drive there will be folders named “ROLAND” and “TMP.”• Macintosh usersA drive icon named “FANX USER” will appear on the desktop.If a memory card is connected, its volume name will bedisplayed.Below it will be folders named “ROLAND” and “TMP.”219