Owner's Manual - Roland

Adding Effects16Reverb Type20Chorus SourceSelects the type of reverb.Value0 (Off): Reverb is not used.1 (Reverb): Normal reverb2 (SRV Room): This reverb simulates typical room acousticreflections.3 (SRV Hall): This reverb simulates typical concert hallacoustic reflections.4 (SRV Plate): This reverb simulates a reverb plate, apopular type of artificial reverb unit thatderives its sound from the vibration of ametallic plate. You can also achieve unusualmetallic-sounding reverbs using “SRVPlate.”5 (GM2 Reverb): General MIDI 2 reverb17 Reverb LevelAdjusts the volume of the sound that has passed throughreverb.Value: 0–12718 Reverb Output AssignSpecifies how the sound routed through reverb will be output.ValueA: Output to the OUTPUT A (MIX) jacks in stereo.B: Output to the OUTPUT B jacks in stereo.19 MFX1–3 Source (Multi-Effects 1 Source)Selects the multi-effects parameter settings that will be used bythe performance. If you wish to use the performance settings,select “PRF.” If you wish to use the settings of the patch/rhythm set assigned to one of the parts, select the part number.Value: PRF, P1–P16Selects the chorus parameter settings that will be used by theperformance. If you wish to use the performance settings, select“PRF.” If you wish to use the settings of the patch/rhythm setassigned to one of the parts, select the part number.Value: PRF, P1–P16When Patch or Rhythm Set Settings AreSelectedWhen the patch or rhythm set’s chorus settings are selected,those settings are shown in each of the performance’s chorussetting screens, and the settings can be then be changed as well.Changes to patch or rhythm set chorus parameter settings arelost when another patch or rhythm set is selected. To keep themodified settings, save the patch/rhythm set settings (p. 59, p.86).21 Reverb SourceSelects the reverb parameter settings that will be used by theperformance. If you wish to use the performance settings, select“PRF.” If you wish to use the settings of the patch/rhythm setassigned to one of the parts, select the part number.Value: PRF, P1–P16When Patch or Rhythm Set Settings AreSelectedWhen the patch or rhythm set’s reverb settings are selected,those settings are shown in each of the performance’s reverbsetting screens, and the settings can be then be changed as well.Changes to patch or rhythm set reverb parameter settings arelost when another patch or rhythm set is selected. To keep themodified settings, save the patch/rhythm set settings (p. 59, p.86).When Patch or Rhythm Set Settings AreSelectedWhen the patch or rhythm set’s multi-effects settings areselected, those settings are shown in each of the performance’smulti-effects setting screens, and the settings can be then bechanged as well. Changes to patch or rhythm set multi-effectsparameter settings are lost when another patch or rhythm set isselected. To keep the modified settings, save the patch/rhythmset settings (p. 59, p. 86).212