Owner's Manual - Roland

Adding Effects13Chorus Output Select18Reverb Output AssignSpecifies how the sound routed through chorus will be output.ValueMAIN: Output to the OUTPUT jacks in stereo.REV: Output to reverb in mono.M+R: Output to the OUTPUT jacks in stereo, and to reverbin mono.When set to “MAIN” or “M+R,” the OUTPUT jack from whichthe sound is output is set in Chorus Output Assign ( 15 ).14 Chorus LevelAdjusts the volume of the sound that has passed throughchorus.Value: 0–12715 Chorus Output AssignSelects the pair of OUTPUT jacks to which the chorus sound isrouted when Chorus Output Select ( 13 ) is set to “MAIN” or“M+R.”ValueA: Output to the OUTPUT A (MIX) jacks in stereo.B: Output to the OUTPUT B jacks in stereo.Specifies how the sound routed through reverb will be output.ValueA: Output to the OUTPUT A (MIX) jacks in stereo.B: Output to the OUTPUT B jacks in stereo.If the Mix/Parallel parameter is set to “MIX,” all sounds areoutput from the OUTPUT A (MIX) jacks in stereo (p. 230).19 Chorus SourceSelects chorus parameter settings. If you want to use thesettings of the patch or rhythm set assigned to the Keyboardpart, select “KBD.” If you want to use the settings of the patchor rhythm set assigned to the Pad part, select “PAD.”Value: KBD, PAD20 Reverb SourceSelects reverb parameter settings. If you want to use the settingsof the patch or rhythm set assigned to the Keyboard part, select“KBD.” If you want to use the settings of the patch or rhythmset assigned to the Pad part, select “PAD.”Value: KBD, PADWhen Chorus Output Select (will have no effect.13) is set to “REV,” this setting16Reverb TypeSelects the type of reverb.Value0 (Off): Reverb is not used.1 (Reverb): Normal reverb2 (SRV Room): This reverb simulates typical room acousticreflections.3 (SRV Hall): This reverb simulates typical concert hallacoustic reflections.4 (SRV Plate): This reverb simulates a reverb plate, apopular type of artificial reverb unit thatderives its sound from the vibration of ametallic plate. You can also achieve unusualmetallic-sounding reverbs using “SRVPlate.”5 (GM2 Reverb): General MIDI 2 reverb17Reverb LevelAdjusts the volume of the sound that has passed throughreverb.Value: 0–127209