Owner's Manual - Roland

Saving/Loading a song (Save/Load)Loading a song (Load Song)Here’s how you can load a song into Temporary Area.1. From the Save/Load Menu screen, press [F6 (Load Song)].fig.20-007_50Importing a WAV/AIFF File(Import Audio)Here’s how you can load an audio file (WAV/AIFF) into samplememory as a sample.In order for audio data to be imported, the data (WAV/AIFF)must be in the following location of user memory or a memorycard./TMP/AUDIO_IMPORT folder* By pressing or in the above screen, you can specify the type ofsongs that will be displayed. If various types of songs are savedtogether, it will be easier to find the desired song if you restrict thedisplayed file types in this way.• VIEW ALL: all songs will be displayed• SVQ ONLY: only SVQ files will be displayed• SMF: only Standard MIDI Files will be displayed• MRC: only MRC files will be displayed2. Press either [F1 (User)] or [F2 (Card)] to select the loaddestination,and use to select a song.If you decide to cancel, press [F7 (Cancel)].3. Press [F8 (Load)].A screen will ask you for confirmation.4. Press [F8 (Exec)] to execute.Loading Samples (Load AllSamples)Here’s how you can load all samples from user memory or memorycard into sample memory.1. From the Save/Load Menu screen, press [F7 (LoadAllSmpl)].A screen will ask you for confirmation.If you decide to cancel, press [F7 (Cancel)].2. Press [F8 (Exec)] to execute.* “/” indicates a directory level.Use USB storage mode (p. 219) to place the files from thecomputer in the above location. Alternatively, you can place thedata in a memory card and use a card reader.1. Press [Save/Load].2. Press [F8 (Import Audio)].3. Press [F1 (User)] or [F2 (Card)] to select the importdestinationarea.[F1 (User)]: Import from user memory.[F2 (CARD)]: Import from a memory card.4. Press or , then select the file that you want toimport.If you want to select two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the files that you want to select. Toremove the check mark, press [F4 (Mark Clear)].If you hold down [SHIFT] and press [F5 (Mark Set All)], a checkmark will be added to all files of the selected bank. If you holddown [SHIFT] and press [F4 (Mark Clr All)], check marks willbe removed from all selected files.5. Press [F8 (Import)].A message will ask you for confirmation.* To cancel, press [F7 (Cancel)].6. Press [F8 (Exec)].The file will be imported, and the Sample List screen willappear.* To cancel, press [F7 (Cancel)].The imported file will be added to the sample list as a sample.This sample is temporary, and will be lost when you turn off thepower. If you want to keep it, press [WRITE] to save the data (p.159).202