Owner's Manual - Roland

Editing SongsStatusSelects the type of data to be thinned.ValueALLPolyphonic AftertouchControl ChangeChannel AftertouchPitch BendRange Min, Range MaxIf you set the Status parameter to “P.AFT” or “C.C,” specify therange of data. Set “Range Min” to the lowest value of the range, and“Range Max” to the highest value of the range.To thin out all polyphonic aftertouch data, set “Range Min” to“C -1” and “Range Max” to “G9.” To thin out C4, set “RangeMin” and “Range Max” to “C4.” To thin out C3 through C4, set“Range Min” to “C3” and “Range Max” to “C4.”• To thin out all controller numbers, set “Range Min” to “0” and“Range Max” to “127.” To thin out number 4, set “Range Min”and “Range Max” to “4.” To thin out numbers 3 through 14, set“Range Min” to “3” and “Range Max” to “14.”Swapping Two Phrase Tracks orPatterns (Exchange)The phrase tracks or patterns will be exchanged in their entirety.ValueTRK 1–TRK 16:The specified phrase trackPTN001–PTN100: The specified patternfig.19-023_50Measure, For (Edit Range)Measure the playback time, or check/modify the range of measuresthat are to be adjusted. If you set “For” to “ALL,” all measures willbe specified.Time H/M/SThe playback time will be displayed. From left to right, the timedisplay indicates “hours: minutes: seconds.”Time Original H/M/SThe current playback time will be displayed.Deleting Blank Measures(Truncate)Copying or merging may sometimes create blank measures at thebeginning of a phrase track or pattern. Truncate deletes silentportions from the beginning of the specified phrase track to the firstnote-on.If other sequencer data (such as program changes or controlchanges) is recorded between the beginning and the first noteonof the specified phrase track, only the last data event of eachtype will be placed before the note-on.fig.19-025_50For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / Pattern (Source Track)For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Adjusting the Song’s PlaybackTime (Time Fit)Specifies the phrase track or pattern from which blank measures willbe deleted.ValueTRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified patternBelow the Track parameter is displayed the location of the beginningof the specified track, and the position of the first note-on.This function calculates the playback time of a song or allows you tomodify the tempo track data so that the song will play back in aspecified time.fig.19-024_50For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)191