Owner's Manual - Roland

Editing SongsCombining Two Phrase Tracks orPatterns into One (Merge)The sequencer data of two phrase tracks or patterns will becombined into one.fig.19-019_50Extracting and Moving a Part ofSequencer Data (Extract)This function extracts a specified sequencer data area from a phrasetrack or pattern and moves it to the same Song position of anotherphrase track or pattern. Additionally, just as with Standard MIDIFile Format 0, when sequencer data from multiple MIDI channels isrecorded on one track, you can also assign one MIDI channel to asingle phrase track.fig.19-020_50For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Src Track / Src Pattern (Source Track)Specifies the phrase track or pattern that is to be merged. After theMerge operation has been executed, no sequencer data will remainin this track.ValueTRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified patternDst Track / Pattern (Destination Track/Pattern)Specifies the merge-destination phrase track or pattern. After theMerge operation has been executed, the sequencer data will becombined into this track.ValueTRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified patternFor details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Src Track / Src Pattern (Source Track)Specifies the phrase track or pattern from which the sequencer datawill be extracted. After Extract is executed, the selected sequencerdata no longer remains on this phrase track or pattern.ValueTRK 1–TRK 16:The specified phrase trackPTN001–PTN100: The specified patternCh / PartSelects the MIDI channel(s) of the data to be extracted.To extract all sequencer data, set this parameter to ALL. To extractjust the sequencer data of a specific MIDI channel, select that MIDIchannel.Value: ALL, Ch1–Ch16If you set the Status parameter to “System Exclusive,” “TuneRequest” or “Pattern Call,” the Channel parameter will not beavailable.Measure, For (Edit Range)Specifies the range of measures from which sequencer data will beextracted. If you set “for” to “ALL,” all measures will be specified.Dst Track / Pattern (Destination Track/Pattern)Specifies the move-destination track or pattern.ValueALL:According to its MIDI channel, the sequencerdata will be divided among phrase tracks 1–16.TRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified pattern188