Owner's Manual - Roland

Editing SongsMeasure, For (Edit Range)fig.19-018_50Specifies the range of measures in which the MIDI channel will bechanged. If you set “For” to “ALL,” all measures will be specified.StatusSelects the type of data for which you wish to change the MIDIchannel.ValueALLNOTEPolyphonic AftertouchControl ChangeProgram ChangeChannel AftertouchPitch BendRange Min, Range MaxIf you have set the Status parameter to “NOTE,” “P.AFT,” “C.C,” or“PROG,” you can specify the range of data. Set “Range Min” to thelowest value of the range, and “Range Max” to the highest value ofthe range.To change the MIDI channel of all notes or polyphonicaftertouch data, set “Range Min” to “C -1” and “Range Max” to“G9.” To change the MIDI channel of C4, set “Range Min” and“Range Max” to “C4.” To change C3 through C4,” set “RangeMin” to “C3” and “Range Max” to “C4.”• To change the MIDI channel of all controller numbers, set“Range Min” to “0” and “Range Max” to “127.” To change theMIDI channel of all program numbers, set “Range Min” to “1”and “Range Max” to “128.” To change number 4, set “RangeMin” and “Range Max” to “4.” To change numbers 3 through14, set “Range Min” to “3” and “Range Max” to “14.”Src Channel, Dst Channel (MIDI Channel)Set Src Channel to the MIDI channel that you want to change, andset Dst Channel to the MIDI channel to which it will be changed.If you have selected ALL for the source MIDI channel, the sequencerdata of all MIDI channels will be combined into the destination MIDIchannel.Value: ALL, 1–16It is not possible to select “ALL” for the destination MIDIchannel.Modifying the Length of Notes(Change Duration)This function modifies the duration (time from note-on to note-off)of notes within a specified area. Depending on the setting, you canalso create staccato or tenuto.For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / Pattern (Source Track)Specifies the phrase track(s) or pattern whose durations will bechanged.ValueALL: Phrase Tracks 1–16TRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified patternCh / PartSpecifies the MIDI channel(s) of notes for which duration will bemodified.If you wish to modify the duration for notes of all MIDI channels, setthis parameter to ALL. When changing the duration for notes of aspecific MIDI channel only, select that MIDI channel using thisparameter.Value: ALL, Ch1–Ch16Measure, For (Edit Range)Specifies the range of measures whose durations will be changed. Ifyou set “For” to “ALL,” all measures will be specified.BiasSet this parameter if you wish to increase or decrease all durationsby a fixed amount. If you want to extend all duration by 10, set thisto “+10.”Value: -4800– +4800MagnifySet this parameter if you wish to increase or decrease durations by aspecified ratio. When set to “100%,” no change is made. A value of“101%” or higher increases the duration; values of “99%” or lowerdecrease the duration. For example, to halve duration, set thisparameter to “50%.” To double durations, set this parameter to“200%.”Value: 0–200%Range Min, Range MaxSpecifies the range of note numbers for which duration will bemodified. For example, if you want to change the duration of notesin the range of C3 to C4, set “Range Min” to “C3” and “Range Min”to “C4.” You can also specify the key range by pressing keys on thekeyboard.187