Owner's Manual - Roland

Editing SongsStatusSelects the type of data to be copied.ValueALLNOTEPoly AftertouchControl ChangeProgram ChangeChannel AftertouchPitch BendSystem ExclusiveTune RequestPattern CallIf the source track is set to “TEMPO,” the Status parameter willnot be available.Range Min, Range MaxIf you have selected “NOTE,” “P.AFT,” “C.C,” or “PROG” for theStatus parameter, specify the range. Set “Range Min” to the lowestvalue of the range, and “Range Max” to the highest value of therange.To copy all notes or polyphonic aftertouch data, set “RangeMin” to “C-1” and “Range Max” to“G9.” To copy C4, set“Range Min” and “Range Max” to “C4.” To copy C3 throughC4, set “Range Min” to “C3” and “Range Max” to “C4.”• To copy all controller numbers, set “Range Min” to “0” and“Range Max” to “127.” To copy all program numbers, set“Range Min” to “1” and “Range Max” to “128.” To copynumber 4, set “Range Min” and “Range Max” to “4.” To copynumbers 3 through 14, set “Range Min” to “3” and “RangeMax” to “14.”ValueALL:Phrase tracks 1–16, the beat track, and the tempotrackTRK 1–TRK 16: The specified phrase trackTEMPO: Tempo trackPTN001–PTN100: The specified patternMeasure, For (Edit Range)Specifies the measure location at which the blank measures are to beinserted, and the number of blank measures to be inserted.BeatIn general, the time signature of the measure immediately beforeinsertion will be used for the blank measures. To change the timesignature of the blank measures to be inserted, use the Beatparameter.Beat can be specified only when you have set the Trackparameter to “ALL.”Transpose the Key (Transpose)This transposes the pitch of notes within a specified area, over a +/-127 semitone range. Use this function to modulate from one key toanother in a song, or to transpose the entire song.fig.19-015_50Inserting a Blank Measure (Insert)This function inserts blank measures into a specified song position.As you can set the time signature of the blank measures, this isconvenient when inserting a phrase having a different time signaturein the middle of a song.fig.19-014_50For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / Pattern (Source Track)Sets the phrase track(s) or pattern that is to be transposed.ValueALL: Phrase Tracks 1–16TRK 1–TRK 16: The specified phrase trackPTN001–PTN100: The specified patternCh / PartFor details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / Pattern (Source Track)Specifies the track(s) or pattern into which blank measures will beinserted.Specifies the MIDI channel(s) of the notes to be transposed.Set this parameter to “ALL” for transposing all notes. Whentransposing only the notes of specific MIDI channel(s), select theMIDI channel(s) using this parameter.Value: ALL, Ch1–Ch16Measure, For (Edit Range)Sets the range of measures that are to be transposed. If you set “For”to “ALL,” all measures will be specified.185