Owner's Manual - Roland

Editing SongsDeleting Unwanted Measures(Delete)This function deletes a specified area of sequencer data, and movesthe subsequent data to fill the gap. As a result, the measure lengthwill be shortened by the number of deleted measures.fig.19-012_50Ch / PartSelects the MIDI channel of the data to be copied.When you want to copy all the sequencer data, set this parameter to“ALL.” To copy only the sequencer data of a specific MIDI channel,select the MIDI channel.Value: ALL, Ch1–Ch16If you set the source track to “TEMPO,” or if the Statusparameter is set to “System Exclusive,” “Tune Request” or“Pattern Call,” the Channel parameter will not be available.Src Measure, For (Edit Range)For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / PatternSpecifies the track(s) or pattern that is to be deleted.ValueALL:TRK 1–TRK 16:TEMPO:Phrase tracks 1–16, the beat track, and the tempotrackThe specified phrase trackTempo trackPTN001–PTN100: The specified patternMeasure, For (Edit Range)Specifies the range of measures that are to be deleted. If you set“For” to “ALL,” all measures will be specified.Copying Phrases (Copy)This function copies a specified area of sequencer data. It isconvenient for repeating the same phrase several times. You cancopy patterns to a phrase track, or copy data from a phrase track to apattern.fig.19-013_50For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Src Track / Pattern (Source Track / Pattern)Specifies the copy-source track(s) or pattern.ValueALL:TRK 1–TRK 16:TEMPO:Phrase tracks 1–16, the beat track, and the tempotrackThe specified phrase trackTempo trackPTN001–PTN100: The specified patternSpecifies the range of copy-source measures. If you set “For” to“ALL,” all measures will be specified.Dst Track/ Pattern (Destination Track/Pattern)Check/modify the copy-destination track or pattern.ValueALL:TRK 1–TRK 16:TEMPO:Phrase tracks 1–16, the beat track, and the tempotrackThe specified phrase trackTempo trackPTN001–PTN100: The specified patternIf you set the source track to “ALL,” the destination track can beset to either “ALL” or “PTN001–PTN100.” If you select“PTN001–PTN100,” the data from the 16 phrase tracks will bemerged as it is copied.• If “TEMPO” is selected as the source track, then only “Tempo”can be selected for the destination track.Dst Measure (Destination Measure)Specifies the copy-destination measure.If you want the copy destination to be right after the last measure ofa song, set this parameter to “END.”Copy ModeSpecifies whether you want to preserve the existing data in the copydestination when copying.ValueMIX:REPLACE:Combines the data from the copy source with theexisting data in the copy destination.Musical data in the copy destination will be erased(i.e., overwritten) when the copy takes place. Onlythe sequencer data of the MIDI channels specified bythe Channel parameter will be overwritten, and dataof other MIDI channels will remain.Copy TimesSpecifies the number of times that the data will be copied to the copydestination.184