Owner's Manual - Roland

Editing SongsRange Min, Range MaxSpecifies the range of note numbers to be quantized.For example, if you want to quantize the range between C3 and C4,set “Note Min” to “C3,” and set “Note Max” to “C4.”You can also specify the key range by pressing keys on thekeyboard.Preview FunctionThe Preview function allows you to hear how quantizing willwork while you are still setting Quantize parameters (beforeyou execute operation). This is called the Preview function. Ifyou modify parameter values during preview playback, thenext preview playback will include those latest value changes.Try various parameter settings to find the one that works best.Pattern Call events assigned to a phrase track or mutedphrase tracks cannot be previewed.Pressing [PLAY] when the Track Edit (Quantize) window isdisplayed selects Preview mode. The two measures from thecurrent location of the song will play back repeatedly. Thepreview start location can also be specified by pressing [FWD]or [BWD]. To exit Preview mode, press [STOP].Erasing Unwanted PerformanceData (Erase)This function erases all the sequencer data inside the specified area.As the erased data is replaced by rests, the original measures willremain.fig.19-011_50Ch / PartSelects the MIDI channel of the data to be erased.When you want to erase all sequencer data, set this parameter to“ALL.” To erase sequencer data of one specific MIDI channel only,select that MIDI channel.Value: ALL, Ch1–Ch16If you set the Track parameter to “TEMPO,” or if the Statusparameter is set to “System Exclusive,” “Tune Request” or “PatternCall,” the Channel parameter will not be available.Measure, For (Edit Range)Specifies the range of measures that are to be erased. If you set “For”to “ALL,” all measures will be specified.StatusSelects the type of data to be erased.ValueALLNOTEPoly AftertouchControl ChangeProgram ChangeChannel AftertouchPitch BendSystem ExclusiveTune RequestPattern CallIf the Track parameter is set to “TEMPO,” the Status parameterwill not be available.Range Min, Range MaxIf you have set the Status parameter to “NOTE,” “P.AFT,” “C.C,” or“PROG,” specify the range. Set “Range Min” to the lowest value ofthe range, and “Range Max” to the highest value of the range.For details on the settings, refer to “Basic Operation for TrackEditing” (p. 180)Track / PatternSpecifies the track(s) or pattern that is to be erased.ValueALL:Phrase tracks 1–16, the beat track, and the tempotrackTRK 1–TRK 16: The specified phrase trackTEMPO: Tempo trackPTN001–PTN100: The specified patternTo erase all notes or polyphonic aftertouch data, set “RangeMin” to “C -1” and “Range Max” to “G9.” To erase C4, set“Range Min” and “Range Max” to “C4.” To erase C3 throughC4, set “Range Min” to “C 3” and “Range Max” to “C4.”• To erase all controller numbers, set “Range Min” to “0” and“Range Max” to “127.” To erase all program numbers, set“Range Min” to “1” and “Range Max” to “128.” To erasenumber 4, set “Range Min” and “Range Max” to “4.” To erasenumbers 3 through 14, set “Range Min” to “3” and “RangeMax” to “14.”183