Owner's Manual - Roland

Recording Songs4. Turn the VALUE dial or press [INC]/[DEC] to add a checkmark.The message will be recorded if you assign a check mark (✔),and will not be recorded if you remove the check mark.If you press [F6 (All Off)], no sequencer data will be recorded.If you press [F7 (All On)], all of the sequencer data will berecorded.5. Press [F8 (Close)] to close the Recording Select window.Erasing Unwanted Data While YouRecord (Realtime Erase)Realtime Erase is a function that erases unwanted data duringrealtime recording. This is particularly convenient during looprecording, since it lets you erase data without stopping recording.Realtime Erase can be executed only if the Recording Mode isset to “MIX.”Recording Arpeggios Aligned tothe Measures of the SequencerWhen recording arpeggios in real time, you can synchronize thearpeggio with the sequencer start/stop timing.For details, refer to “Arpeggio/Rhythm Sync Switch” (p. 227).Auditioning Sounds or PhrasesWhile Recording (RehearsalFunction)The Rehearsal function lets you temporarily suspend recordingduring realtime recording. This is convenient when you want toaudition the sound that you will use next, or to practice the phrasethat you will record next.1. Begin realtime recording (p. 170).fig.18-004_50The Realtime Recording window appears.You can also erase the data of a specific channel.1. Begin realtime recording (p. 170).The Realtime Recording window appears.fig.18-004_502. Press [F6 (Erase)].The Realtime Erase window appears.fig.18-008_502. Press [F7 (Rehearsal)] or [REC].The [REC] indicator will blink, indicating that you are inrehearsal mode. In this state, nothing will be recorded whenyou play the keyboard.3. To return to record mode, press [F7 (Rehearsal)] or [REC]once again.3. Erase unwanted data.To erase all data (except for Pattern Call messages), press [F7(Erase All)]. Data will be erased for as long as you hold downthe button.To erase notes of a specific key, hold down that key. Data forthat note will be erased for as long as you hold down that key.To erase notes of a specific key range, hold down the top andbottom keys of that range. Data for that range will be erased foras long as you hold down those keys.4. Press [F8 (Close)] to close the Realtime Erase window.You will return to the normal recording state.* You can also erase the data of a specific channel.173