Owner's Manual - Roland

Panel Descriptions[STOP]Controls sequencer stop.While stopped, you can hold down [SHIFT] and Press [PLAY] toperform MIDI Update. -> (p. 165)[REC]The display changes to the Recording Standby window. -> (p. 170)If you press this during recording, the Rehearsal function will beactivated. -> (p. 173)7 DISPLAYDisplayThis displays information regarding the operation you areperforming8[MENU]Opens the MENU. The contents of the menu will depend on thecurrent mode.Function buttons ([F1]–[F8])During editing, these buttons execute a variety of functions, andtheir function will differ depending on the screen.[TEMPO]Sets the tempo (BPM). -> (p. 128, p. 135, p. 166)9LCD CONTRAST knobAdjusts the display contrast. -> (p. 22)[WRITE]Save edited settings into Temporary Area or a memory card. -> (p.59, p. 86, p. 120, p. 132, p. 134, p. 159, p. 198, p. 225)[PATCH EDIT]Make patch-related settings.[SONG EDIT]Make settings for song data and song edit. -> (p. 164)[EFFECTS]Make effect-related settings. Here you can also make masteringsettings. -> (p. 206)10[MIXER]View the Performance mode’s Mixer screen. -> (p. 103)[LAYER/SPLIT]View the Performance mode’s Layer screen. -> (p. 100)[PATCH/RHYTHM]Enter Patch/Rhythm mode. -> (p. 38)11VALUE DialThis is used to modify values. If you hold down [SHIFT] as you turnthe VALUE dial, the value will change in greater increments.[DEC], [INC]This is used to modify values. If you keep on holding down onebutton while pressing the other, the value change accelerates. If youpress one of these buttons while holding down [SHIFT], the valuewill change in bigger increments.[CURSOR]Moves the cursor location up/down/left/right.[SHIFT] (JUMP)This button is used in conjunction with other buttons to executevarious functions.[ENTER]Use this button to execute an operation.[EXIT]Return to the previous screen, or close the currently open window.In some screens, this causes the currently executing function to beaborted.12 DYNAMIC PAD / SAMPLING[SAMPLE EDIT]Edit a sample. -> (p. 148)[SAMPLE LIST]View the sample list. -> (p. 146)[SAMPLING]View the Sampling Menu screen. -> (p. 142)[SKIP BACK SAMPLING]Sample the performance for a specified duration prior to the momentyou pressed the button. -> (p. 145)[PAD SETTING]Make pad settings. -> (p. 160)[CLIP BOARD]You can register frequently used screens and use the pads to recallthem (the Bookmark function). -> (p. 37)[SAVE/LOAD]Saves/loads data in the Temporary Area (p. 29) or sample memory(p. 32) to/from user memory or a memory card.[PAD 1–16]Use as a keyboard to play sound.[ROLL]Turn “roll” playback on/off. -> (p. 160)[HOLD]Turn “hold” (sustaining the sound after you release the pad) on/off.->(p. 160)13Pitch Bend/Modulation LeverThis allows you to control pitch bend or apply vibrato.14Here you can install a wave expansion board (SRX series; soldseparately) or install separately sold memory (DIMM).On the Fantom-X6/X7, this is located on the bottom panel. -> (p.240, p. 242)15[PIANO MODE]Switches to a special mode optimal for playing piano sounds. If youpress this button while holding down [SHIFT], the Live Setting Playscreen will appear. -> (p. 54)17