Owner's Manual - Roland

Editing a SampleAssigning a Sample as aPatch to a Part (Assign toKeyboard)3. Press [F6 (Assign to Kbd)].fig.15-012_50Assign to Keyboard window appears.Here’s how you can use the currently selected sample to create apatch, and assign it to a keyboard part.* From the Sample List screen you can also press [F7 (Load Utility)]->[F2 (Assign to Pad)] to execute Assign To Pad.* You cannot execute this with more than one sample selected.From Patch Mode1. Press [SAMPLE LIST] to select a sample, and then press[SAMPLE EDIT] to access the Sample Edit screen.2. Press [F6 (Assign KB/Pad)].fig.15-009_50Assign to Kbd/Pad window appears.4. Press or to specify the part to which the new patchis to be assigned, and then press [F8 (Select)].The Assign to Keyboard window will appear, and you canverify the assignment for the part.If you press [F2 (Tempo Sync)] to turn it into red, the WaveTempo Sync parameter (p. 63) will be turned ON for the patchthat is assigned.5. Press [F8 (Exec)]A message will ask you for confirmation.6. Press [F8 (Exec)].The sample will be assigned (as a patch) to the specified part.To cancel, press [F7 (Cancel)].7. Press [EXIT] to return to the previous screen.3. Press [F6 (Assign to Kbd)].The Assign to Keyboard window will appear, and you canverify the assignment for the keyboard part.If you press [F2 (Tempo Sync)] to turn it into red, the WaveTempo Sync parameter (p. 63) will be turned ON for the patchthat is assigned.4. Press [F8 (Exec)]A message will ask you for confirmation.5. Press [F8 (Exec)].The sample will be assigned (as a patch) to the specifiedkeyboard part.To cancel, press [F7 (Cancel)].From Performance Mode1. Press [SAMPLE LIST] to select a sample, and then press[SAMPLE EDIT] to access the Sample Edit screen.2. Press [F6 (Assign KB/Pad)].fig.15-009_50Assign to Kbd/Pad window appears.If you select another patch, the patch you assigned will bereplaced by that patch. If you want to keep the patch youcreated, press [WRITE] and save it.Create a Rhythm Set(Create Rhythm)Here’s how you can use the sample(s) to create a rhythm set. Thisoperation is called Create Rhythm.When you execute Create Rhythm, the sample(s) will become arhythm set and will be assigned to a part.For example, you could record a sample, use the Chop function todivide it, and then use this Create Rhythm operation to assign thedivided samples to a part as a rhythm set. Alternatively, you canassign a mark to two or more samples in the sample list, and executeCreate Rhythm to assign the samples to a part as a rhythm set.The samples will be assigned consecutively from the C2 key.1. Press [SAMPLE LIST] to access the Sample List screen.2. Select the samples.If you want to select two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the samples that you want to select.To remove the check mark, press [F4 (Mark Clear)].You can press [F8 (Preview)] to audition the selected sample.152