Owner's Manual - Roland

Editing a SampleImporting an Audio FileHere’s how an audio file (WAV/AIFF) can be loaded into memoryas a sample.Place the audio files in the “TMP/AUDIO_IMPORT” folder onthe user memory or memory card. For details on how you canuse your computer to copy a file into the user area or memorycard, refer to p. 218.Displaying Sample EditScreen1. When you press [SAMPLE EDIT] in the sampling section.fig.14-007_50The Sample Edit screen will appear.1. From the Sample List screen or Sample Edit screen (p. 148),press [MENU] to select “Import Audio,” and then press[ENTER].* You can obtain the same result by pressing [SAVE/LOAD] and thenpressing [F8 (Import Audio)] instead of performing step 1.2. Press [F1 (User)] or [F2 (Card)] to select the import-sourcearea.User: Select a file from the user area.Card: Select a file from the memory card.3. Use [CURSOR] to move the cursor to the “TMP/AUDIO_IMPORT.”4. Press or , then select the file that you want toimport.If you want to select two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the files that you want to select. Toremove the check mark, press [F4 (Mark Clear)].If you hold down [SHIFT] and press [F5 (Mark Set All)], a checkmark will be added to all files of the selected folder. If you holddown [SHIFT] and press [F4 (Mark Clr All)], check marks willbe removed from all selected files.Samples that you edit will be lost when you turn off the power.If you want to keep them, you must Save them (p. 159).Magnifying/Shrinking theWaveform Display (Zoom In/Out)Here’s how to change the magnification of the sample display.1. In the Sample Edit screen, press [F7 (Zoom In/Out)].fig.15-002_50The Zoom In/Out sub-window will appear.5. Press [F8 (Import Audio)].A message will ask you for confirmation.* To cancel, press [F7 (Cancel)].6. Press [F8 (Exec)].The file will be imported, and the Sample List screen willappear.* To cancel, press [F7 (Cancel)].The imported file will be added to the sample list as a sample.This sample is temporary, and will be lost when you turn off thepower. If you want to keep it, press [WRITE] to save the data (p.159).2. Use [CURSOR] to change the magnification of the display.• Horizontal axis (time axis): 1/1–1/65536Press to increase the display magnification.Press to decrease the display magnification.* Either turn the VALUE dial or use [INC], [DEC] to adjust thissetting.• Vertical axis (waveform amplitude axis): x1–x128Press to increase the display magnification.Press to decrease the display magnification.3. Press [F8 (Close)] to close the sub-window.Even without displaying the Zoom In/Out sub-window, youcan press CURSOR to expand/shrink the horizontalaxis, or hold down [SHIFT] and press CURSOR toexpand/shrink the vertical axis.148