Owner's Manual - Roland

Editing a SampleLoading a SampleHere’s how you can load a sample from the user area, a memorycard, or a preset into sample memory.1. Press [SAMPLE LIST].The Sample List display appears.2. From [F1 (Preset)]–[F3 (Card)], select the bank that containsthe desired sample.3. Use VALUE dial, [INC][DEC], or to select a sample.If you want to load two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the samples that you want to select.To remove the check mark, press [F4 (Mark Clear)].If you hold down [SHIFT] and press [F5 (Mark Set All)], a checkmark will be added to all samples of the selected bank. If youhold down [SHIFT] and press [F4 (Mark Clr All)], check markswill be removed from all selected samples.The edit screen for the selected sample will appear.4. Press [F7 (Load Utility)], and then press [F7 (Load)].A message will ask you for confirmation.5. Press [F8 (Exec)] to load the sample.To cancel, press [F7 (Cancel)].* You can also perform this operation from the Sample Edit or SampleList screen by pressing [MENU] and selecting Load Sample.Loading all SamplesHere’s all samples in the user memory and memory card can beloaded.When you execute Load All Samples, all unsaved samples willbe erased.If the total size of the data in the user bank and card bankexceeds the size of memory, the samples of the user bank will beloaded first. At this time, as many card bank samples aspossible will be loaded, starting from the lowest-numberedsample.1. From the Sample List screen or Sample Edit Screen (p.148), press [MENU].2. Press or to select “Load All Samples,” and thenpress [ENTER].A message will ask you for confirmation.* If you press [SAVE/LOAD] and then press [F7 (Load All Smpl)]instead of performing steps 1–2, the same confirmation message willappear.3. Press [F8 (Exec)] to execute.To cancel, press [F7 (Cancel)].* You can also perform this operation from the Sample Edit or SampleList screen by pressing [MENU] and selecting Load All Samples.Unloading a SampleHere’s how you can unload a sample from sample memory. Thesaved sample file itself will not be deleted.1. With the Sample List screen shown, choose [F1 (Preset)]–[F3 (Card)] to select the group that contains the sample youwant to erase.2. Use VALUE dial, [INC][DEC], or to select a sample.If you want to erase two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the samples that you want to select.To remove the check mark, press [F4 (Mark Clear)].If you hold down [SHIFT] and press [F5 (Mark Set All)], a checkmark will be added to all samples of the selected bank. If youhold down [SHIFT] and press [F4 (Mark Clr All)], check markswill be removed from all selected samples.The edit screen for the selected sample will appear.You can press [F8 (Preview)] to audition the selected sample.3. Press [F7 (Load Utility)], and the press [F6 (Unload)].A message will ask you for confirmation.4. Press [F8 (Exec)] to unload the sample.To cancel, press [F7 (Cancel)].* You can also perform this operation from the Sample Edit screen bypressing [MENU] and selecting Unload Sample.Deleting a SampleHere’s how to completely delete a sample file.* You cannot delete the preset samples.1. With the Sample List screen shown, choose [F2 (User)]–[F3(Card)] to select the group that contains the sample youwant to delete.2. Turn the VALUE dial, or press or to select thesample.If you want to delete two or more samples, press [F5 (Mark Set)]to add a check mark (✔) to the samples that you want to select.To remove the check mark, press [F4 (Mark Clear)].If you hold down [SHIFT] and press [F5 (Mark Set All)], a checkmark will be added to all samples of the selected bank. If youhold down [SHIFT] and press [F4 (Mark Clr All)], check markswill be removed from all selected samples.The edit screen for the selected sample will appear.You can press [F8 (Preview)] to audition the selected sample.3. Press [F7 (Load Utility)], and the press [F5 (Delete Sample)].A message will ask you for confirmation.4. Press [F8 (Exec)] to delete the sample.To cancel, press [F7 (Cancel)].* You can also perform this operation from the Sample Edit or SampleList screen by pressing [MENU] and selecting Delete Sample File.147