Owner's Manual - Roland

Playing Rhythms4. When you have made the setting, press [F8 (Close)].Using a controller to adjust the playback tempoSince tempo control is assigned to one of the Fantom-X’srealtime control knobs, it’s easy to adjust the tempo at which therhythm pattern will play back.fig.11-003Rhythm Pattern Settings1. Hold down [SHIFT] and press [RHYTHM].2. Press [F2 (Rhythm)].A screen like the one below appears.If Performance mode is selected, (PERFORMANCE) will appearat the right of “Rhythm Pattern.”fig.13-003_50Tempo1. Press the REALTIME CONTROL button so the ARP/RHY indicator lights.2. Play an Rhythm Pattern, and turn the realtime controlknob.Select the Rhythm Group1. Hold down [SHIFT] and press [RHYTHM].2. Press [F1 (Rhythm Group)].A screen like the one below appears.If Performance mode is selected, (Performance) will appear atthe right of “Rhythm Group.”fig.13-002_503. Press or to move the cursor to each parameter,and either turn the VALUE dial or press [INC] or [DEC] tomake the setting.You can audition the rhythm pattern by pressing [F6 (Preview)]so it lights in red. When you’ve finished auditioning thepattern, press [F6 (Preview)] once again to stop.4. When you have made the setting, press [EXIT].Selecting Rhythm PatternsSelect the basic playing style of the rhythm.This selects the rhythm’s basic performance Style.Value: P001–256 (Preset), U001–256 (User)* When you select the Rhythm group, the most suitable rhythm set isassigned to the Pad part. (In the screen, this is indicated by“Recommended Rhy (Recommended Rhythm set).”)3. Turn the VALUE dial or press [INC] or [DEC] to make thesetting.This selects the Rhythm group’s basic performance Style.Value: P01–32 (Preset), U01–32 (User)4. When you have made the setting, press [EXIT].136