Owner's Manual - Roland

Modifying the Sound in Real TimeChanging Realtime Controller SettingsRealtime Controller Knob Settings1. Hold down [SHIFT] and rotate one of the REALTIMECONTROL knobs.fig.10-008_50The Knob screen appears.Assignable Switch Settings1. Hold down [SHIFT] and press one of the ASSIGNABLE SWbutton.fig.10-009_50The Switch screen appears.2. Move the cursor to the parameter that you want to set, andturn the VALUE dial or press [INC]/[DEC] to make thesetting.2. Move the cursor to the parameter that you want to set, andturn the VALUE dial or press [INC]/[DEC] to set it.3. If you want to save your settings, press [F8 (System Write)].Press [Exit] to return to the previous screen.Realtime controller settings are saved independently for eachperformance as part of the performance settings. This lets youcreate performances that make effective use of controllersettings.Knob Assign 1–4 (Realtime Control KnobAssign 1–4)Specify the functions that will be controlled by the [ValueCC01–31, 33–95: Controller numbers 1–31, 33–95] knobs.For more information about Control Change messages, pleaserefer to “MIDI Implementation” (p. 298).PITCH BEND:AFTERTOUCH:ARP STYLE:ARP GRID:ARP DURATION:ARP MOTIF:CHORD FORM:MASTER LEVEL:Pitch BendAftertouchArpeggio StyleArpeggio GridAdjusts the duration of each arpeggiated noteArpeggio MotifChord form of the Chord Memory functionThe volume of the entire Fantom-X* Master Level adjusts the volume both of the OUTPUT A jacks and theDIGITAL OUT jack. The panel VOLUME knob only adjusts thevolume of the OUTPUT A jacks.ARP STEP:DIGITAL IN:Controls the playback position of the arpeggiopattern.Input level from DIGITAL IN.3. If you want to save your settings, press [F8 (System Write)].Press [Exit] to return to the previous screen.Realtime controller settings are saved independently for eachperformance as part of the performance settings. This lets youcreate performances that make effective use of controllersettings.Switch AssignSpecify the function that will be controlled by the assignable switch.ValueTRANSPOSE DOWN:TRANSPOSE UP:TAP TEMPO:MONO/POLY:PORTAMENTO:HOLD:MFX1–3 SW:CHORUS SW:REVERB SW:MASTERING SW:LOOP:RHY START/STOP:Lowers the key range in semitone steps (upto 5 semitones lower).Raises the key range in semitone steps (up to6 semitones higher).Tap tempo (a tempo specified by the intervalat which you press the button).Pressed to toggle between polyphonic(POLY) and monophonic (MONO) play of apatch.Portamento On/OffHold play On/OffMulti-effect 1–3 switchChorus switchReverb switchMastering switchLoop play On/OffRhythm pattern playback On/OffIf Patch mode is selected, assignable switches are availablewhen the keyboard part is selected.125