Owner's Manual - Roland

Modifying the Sound in Real TimeResonanceEmphasizes the portion of the sound in the region of the cutofffrequency, adding character to the sound. Excessively high settingscan produce oscillation, causing the sound to distort.Value: 0–127LevelSets the volume.Value: 0–127Chorus Send LevelSets the level of the signal sent to chorus.Value: 0–127Reverb Send LevelSets the level of the signal sent to reverb.Value: 0–127Using Knobs or Buttons toModify the Sound (RealtimeController)You can use the REALTIME CONTROL knobs and ASSIGNABLESW buttons to modify the sound in real time.1. Access the Patch Play screen (p. 38).fig.10-007.eThe “Realtime Control” area shows the function that is assignedto each realtime controller knob and button. [ ] indicate thefour knobs, and [ ], [ ] indicate the two buttons.State of the controller settingsThe controller applies to the part whose display is visibleLFO RateAdjusts the modulation rate, or speed, of the LFO.Value: 0–127LFO Osc 1 Pitch DepthSpecifies the depth to which the LFO will modulate the OSC1 pitch.Value: -63–+63LFO Osc 2 Pitch DepthSpecifies the depth to which the LFO will modulate the OSC2 pitch.Value: -63–+63LFO Osc 1 Pulse Width DepthSpecifies the depth to which the LFO will modulate the pulse widthof the OSC1 waveform.* The Pulse Width is activated when “SQR” is selected with OSC1/2waveform.Value: -63–+63LFO Osc 2 Pulse Width DepthSpecifies the depth to which the LFO will modulate the pulse widthof the OSC2 waveform.* The Pulse Width is activated when “SQR” is selected with OSC1/2waveform.Value: -63–+63Range (Solo synth range)Specifies the range in which the pitch of the solo synth will vary.Value:2 OCTAVES, 4 OCTAVES, 8 OCTAVES2. You can select the function of the knobs by pressing thebutton located at the right of the realtime control knobs.The parameter display at the bottom of the screen will alsochange.• If the FILTER/ENV indicator is litParameters that will changewhen you turn a realtime controller knobParameters that will change when you press an assignable switchTurning the knobs will control Cutoff, Resonance, Attack, andRelease.• If the ARP/RHY indicator is litTurning the knobs will control the arpeggio parameters Rangeand Accent, and the rhythm parameters Accent Rate andTempo.• If the ASSIGNABLE indicator is litTurning the knobs will control the assigned parameters. Youcan freely assign parameters.* If the indicators are unlit, turning the knobs will not control anyparameters.3. While playing the keyboard or pressing the pads to producesound, operate the REALTIME CONTROL knobs andASSIGNABLE SW buttons.The sound will change according to the function assigned toeach knob or button.124