Owner's Manual - Roland

Creating a PerformanceKnobfig.09-016_50Switchfig.09-017_50For details on these settings, refer to “Selecting the ParameterControlled by the Realtime Controllers or D BeamController (Control Setting)” (p. 114).Knob parameters are valid only when the REALTIMECONTROL button is set to “ASSIGNABLE.”Knob Assign 1–4(Realtime Control Knob Assign 1–4)Specify the functions that will be controlled by the [ValueCC01–31, 33–95: Controller numbers 1–31, 33–95] knobs.For more information about Control Change messages, pleaserefer to “MIDI Implementation” (p. 298).Pitch Bend:Aftertouch:Arp Style:Arp Grid:Arp Duration:Arp Motif:Chord Form:Master Level:Pitch BendAftertouchArpeggio StyleArpeggio GridAdjusts the duration of each arpeggiated noteArpeggio MotifChord form of the Chord Memory functionThe volume of the entire Fantom-X* Master Level adjusts the volume both of the OUTPUT A jacks and theDIGITAL OUT jack. The panel VOLUME knob only adjusts thevolume of the OUTPUT A jacks.Arp Step:Digital In:Controls the playback position of the arpeggiopattern.Input level from DIGITAL IN.For details on these settings, refer to “Selecting the ParameterControlled by the Realtime Controllers or D BeamController (Control Setting)” (p. 114).Switch 1/2 (Assignable Switch 1–2)Specify the functions that will be controlled by the [ ]/[ ]buttons.ValueTranspose Down: Lowers the key range in semitone steps (up to 5semitones lower).Transpose Up: Raises the key range in semitone steps (up to 6semitones higher).Tap Tempo: Tap tempo (a tempo specified by the interval atwhich you press the button).Mono/poly: Pressed to toggle between polyphonic (POLY)and monophonic (MONO) play of a patch.Portamento: Portamento On/OffHold:Hold play On/OffMFX1–3 Sw: Multi-effect 1–3 switchChorus Sw: Chorus switchReverb Sw: Reverb switchMastering Sw: Mastering switchLoop:Loop play On/OffRhythm Start/Stop: Rhythm pattern playback On/Off117