Owner's Manual - Roland

Creating a PerformanceExt Pan (External Pan)If you want Pan messages to also be transmitted when you select aPerformance, specify the desired value (L64–0–63R) for the part. Ifyou do not want this message to be transmitted, set this to “OFF.”Value: L64–0–63R, OFFThese messages will not be transmitted by parts whoseKeyboard Switch is turned off.[F8 (MIDI Filter)]fig.09-009_50Polyphonic Key Pressure (Receive PolyphonicKey Pressure Switch)For each MIDI channel, specify whether MIDI polyphonic keypressure messages will be received (ON), or not (OFF). Assigning acheck mark (✔) will enable reception, and removing the check markwill disable reception.Modulation (Receive Modulation Switch)For each MIDI channel, specify whether MIDI Modulation messageswill be received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Volume (Receive Volume Switch)For each MIDI channel, specify whether MIDI Volume messages willbe received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Pan (Receive Pan Switch)For each MIDI channel, specify whether MIDI Pan messages will bereceived (ON), or not (OFF). Assigning a check mark (✔) will enablereception, and removing the check mark will disable reception.For details on these settings, refer to “Adjusting theParameters of Each Part” (p. 107).MIDI FilterProgram Change (Receive Program ChangeSwitch)For each MIDI channel, specify whether MIDI Program Changemessages will be received (ON), or not (OFF). Assigning a checkmark (✔) will enable reception, and removing the check mark willdisable reception.Bank Select (Receive Bank Select Switch)For each MIDI channel, specify whether MIDI Bank Select messageswill be received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Pitch Bend (Receive Pitch Bend Switch)For each MIDI channel, specify whether MIDI Pitch Bend messageswill be received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Channel Pressure (Receive Channel PressureSwitch)For each MIDI channel, specify whether MIDI Channel Pressuremessages will be received (ON), or not (OFF). Assigning a checkmark (✔) will enable reception, and removing the check mark willdisable reception.Expression (Receive Expression Switch)For each MIDI channel, specify whether MIDI Expression messageswill be received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Hold-1 (Receive Hold 1 Switch)For each MIDI channel, specify whether MIDI Hold 1 messages willbe received (ON), or not (OFF). Assigning a check mark (✔) willenable reception, and removing the check mark will disablereception.Phase Lock (Phase Lock Switch)Set Phase Lock to “✔” (ON) when you want to suppressdiscrepancies in timing of parts played on the same MIDI channel.When the Phase Lock parameter is set to “ON,” parts on thesame MIDI channel are put in a condition in which their timingis matched, enabling them to be played at the same time.Accordingly, a certain amount of time may elapse betweenreception of the Note messages and playing of the sounds. Turnthis setting to “ON” only as needed.Velocity CurveVelocity Curve selects for each MIDI channel one of the fourfollowing Velocity Curve types that best matches the touch of theconnected MIDI keyboard. Set this to “OFF” if you are using theMIDI keyboard’s own velocity curve.Value: OFF, 1–4fig.09-0101 2 3 4113