Owner's Manual - Roland

Playing in Performance ModeViewing the Part Settings as aList (Performance Part View)In Performance mode you can view the part settings as a list. This iscalled the “Part View” screen. In this screen you can view a list thatshows settings for all parts at once, such as the patch assigned toeach part, and its volume and pan settings. You can also edit thesesettings here, and make detailed settings that cannot be made in theLayer screen or Mixer screen.1. Access the Performance Layer or Mixer screen.2. Press [F2 (Part View)].The Part View screen will appear.For details on the setting, refer to “Viewing the Part Settingsas a List (Performance Part View)” (p. 107).fig.08-017_50Viewing MIDI messages foreach Part (Part Information)In Performance mode, the reception status of MIDI messages thatcontrol various things can be viewed for each part. This is usefulwhen you want to check whether the sound generator is respondingcorrectly to the keyboard, or to operations from an external MIDIcontroller.1. Access the Performance Layer or Mixer screen (p. 97).2. Hold down [SHIFT] and press [F2 (Part Info)].fig.08-018_50The Part Information window appears.3. Press [F1 (Level/Pan)]–[F8 (MIDI Filter)] to select the screen.4. Press [EXIT] to return to the Layer or Mixer screen.Performing with theArpeggio/Rhythm functionFor details on using the Arpeggio and Rhythm functions, refer to“Playing Arpeggios” (p. 128),” and “Playing Rhythms” (p. 135).Performing with theRealtime Controllers and DBeam ControllerFor details on the setting, refer to “Make Settings for the RealtimeControllers and D Beam Controller (Ctrl)” (p. 114).3. Turn VALUE dial or press [INC][DEC] to select the messagethat you want to check.Modulation: Modulation messagesBreath:Foot Type:Volume:Panpot:Expression:Hold 1:Pitch Bend:Aftertouch:Voices:Breath messagesFoot type messagesVolume messagesPanpot messagesExpression messagesHold 1 messagesPitch Bend messagesAftertouch messagesVoice messages (The number of voices used)4. Press [F8 (Close)] to close the window.Viewing the number ofvoices used by the soundgenerator (Voice Monitor)For details, refer to “Viewing the number of voices used by thesound generator (Voice Monitor)” (p. 37).Adjusting the Master LevelFor details, refer to “How Do I Adjust the Volume?” (p. 229)106