Owner's Manual - Roland

Playing in Performance ModeSelecting a Part to PlayIndividually (Solo)When playing back a song, you can choose to hear just a specific partplay by itself.1. Press [MIXER] to access the Mixer screen.2. Use to move the cursor to the solo switch.3. Turn the VALUE dial or press [INC] or [DEC] to turn theSOLO switch on/off.fig.08-016_50Silencing the Playback of a SpecificPart (Mute)When playing along with a song, you can turn off (i.e., mute) partsyou don't want to hear. This allows you to turn off the melody partfor karaoke applications or for practicing the muted part.1. Press [MIXER] to access the Mixer screen.2. Use to move the cursor to the mute switch.3. Turn the VALUE dial or press [INC] or [DEC] to turn theMUTE switch on/off.fig.08-016a_50This setting is linked with the Solo Part Select parameter (PartView screen), and can be saved as a performance setting.Part Mute does not turn off the MIDI receive switch; rather, itsets the volume to the minimum setting to silence the sound.Therefore, MIDI messages are still received.Part Mute does not turn off the MIDI receive switch; rather, itsets the volume to the minimum setting to silence the sound.Therefore, MIDI messages are still received.Using pads to mute PartsYou can use the pads to switch part muting on/off. Pad numbers 1–16 correspond to part numbers 1–16.1. Press [MIXER] to access the Mixer screen.2. Press [F3 (Mute)].The Muting Parts with Dynamic Pads screen will appear.At this time, the pads will function as mute on/off buttons; eachtime you press a pad, muting will be switched on or off.• Pad lit: muted• Pad unlit: not mutedPressing [F6 (All Mute)] will mute all parts. Pressing [F7 (AllPlay)] will un-mute all parts.105