Owner's Manual - Roland

Playing in Performance ModeSelecting in the Mixer Screen1. Press [MIXER] to access the MIXER screen.2. Use or to select a part.3. Use to move the cursor to the patch number.fig.08-014Editing the Part SettingsIn the Mixer screen you can set the following parameters for eachpart.Performance Mixer1 screenParameterPart Level (p. 108)Part Pan (p. 108)Part Reverb Send (p. 108)Part Chorus Send (p. 108)Solo Switch (p. 105)Mute Switch (p. 105)Shown in the Mixer screenasLevelPanRevChoSM4. Turn the VALUE dial or use [INC] [DEC] to select a patch.Selecting the Rhythm Set1. Press [MIXER] to access the MIXER screen.2. Use or to select a part.3. Use to move the cursor to the following location.fig.08-015Performance Mixer2 screenParameterKeyboard Switch (p. 110)Arpeggio Part (p. 130)Pad Part (p. 161)Part Coarse Tune (p. 109)Output Assign (p. 108)1. Press [MIXER].The Performance Mixer 1 screen will appear.Shown in the Mixer screenasKAPKeyOutput Assign* If you want to edit the parameters of the Performance Mixer 2 screen,press [F6] to switch screens.fig.04-016_504. Turn the VALUE dial or press [INC] [DEC] to select “R.”The rhythm set will be selected.2. Use or to move the cursor to the parameter youwant to edit.3. Use or to move the cursor to the part that you wantto edit.4. Turn the VALUE dial or use [INC] [DEC] to set the desiredvalue.The green border enclosing four parts corresponds to the fourREALTIME CONTROL knobs.104