Owner's Manual - Roland

Playing in Performance ModeUsing the Mixer ScreenSelecting the Sound for a PartYou can switch the patch that is assigned to a part.Selecting Parts for a Layer or SplitThe currently selected part is called the “current part.”1. In the Mixer 2 screen, use or to select the part.fig.08-012Current PartSelecting from a list display1. Select the part whose sound you want to switch.2. Press [F1 (Patch List)].The Patch List screen will appear.fig.05-008_50* Use [CURSOR] to move the “Part,” and turn VALUE dial or press[INC] [DEC] to select the part.You can also select multiple parts in the Mixer screen.2. In the Mixer 2 screen, press to move the cursor to thebottom of the screen.* To cancel, press [EXIT].3. Use or to select a patch.If you press [F4 (Patch Categ)], the list will show the categories.If you press [F5 (Patch)] or [F6 (Rhythm)], the list will show thepatch groups.fig.05-009_503. Press [INC] to display “KBD,” and select the part that youwant to sound.When you play the keyboard, you will hear the current part andthe parts whose keyboard switch has a check mark.fig.08-013_50To switch groups, press [F1 (⇑)] [F2 (⇓)].By pressing [F7 (Preview)] you can audition a patch using apreselected phrase appropriate for that type (category) of patch(Phrase Preview).4. Press [F8 (Select)] to select the patch.About the keyboard switchUse the keyboard switch when you want to play multiplesounds layered together (Layer) or assign different sounds todifferent regions of the keyboard (Split). Conversely, you canturn off all keyboard switches when you are creating data, etc.103