Owner's Manual - Roland

Playing in Performance ModeSelecting the Part that You want toSound (Keyboard Switch)Here's how to select the parts whose patch or rhythm set will sound.For each part, use the check box to specify whether that part will beplayed from the keyboard; this is called the “keyboard switch.”1. From the Layer screen, Use [CURSOR] to move the cursorto “KBD,” and press [INC] to add a check mark (✔) to“KBD.”When you play the keyboard, you will hear the current part andthe parts that have a check mark.fig.08-008_50Selecting the Sound for a PartIf you don’t like the patch that is assigned to a part, it’s easy toswitch the patch.Selecting from a list display1. Select the part whose sound you want to switch.2. Press [F1 (Patch List)].The Patch List screen will appear.fig.05-008_50* To cancel, press [EXIT].About the keyboard switchUse the keyboard switch when you want to play multiplesounds layered together (Layer) or assign different sounds todifferent regions of the keyboard (Split). Conversely, you canturn off all keyboard switches when you are creating data, etc.3. Use or to select a patch.If you press [F4 (Patch Categ)], the list will show the categories.If you press [F5 (Patch)] or [F6 (Rhythm)], the list will show thepatch groups.fig.05-009_50To switch groups, press [F1 (⇑)] [F2 (⇓)].By pressing [F7 (Preview)] you can audition a patch using apreselected phrase appropriate for that type (category) of patch(Phrase Preview).4. Press [F8 (Select)] to select the patch.101