Owner's Manual - Roland

Playing in Performance ModeSelecting FavoritePerformances3. Press [F3 (Favorite)].fig.08-006_50The Favorite List screen appears.You can bring together your favorite and most frequently usedperformances in one place by registering them in the FavoritePerformance. By using this function you can quickly select yourfavorite performances.For instructions on how to register to the Favorite Performance,refer to “Registering a Favorite Performance” (p. 100).1. Press [LAYER/SPLIT] or [MIXER].2. Press [F5 (Perf List)] and then press [F3 (Favorite)].The Favorite List screen appears.fig.08-005_504. Press [F1 (⇑)] [F2 (⇓)] to select the bank in which you wishto register the Performance.5. Press or to select the number to which you wish toregister. The number you select here corresponds to [F1]–[F8].6. Press [F6 (Regist)] to execute the registration.* To cancel, press [EXIT].By pressing [F5 (Remove)] you can cancel the Performanceregistration that is selected in the Favorite List screen.Using the Layer Screen3. Press or to select a performance number.To switch banks, press [F1 (⇑)] [F2 (⇓)].4. Press [F8 (Select)] to select the patch.Registering a FavoritePerformanceYou can bring together your favorite and most frequently usedPerformances in one place by registering them in the FavoritePerformance. By using this function you can rapidly select favoritePerformances from Preset/User/Card area or a Wave ExpansionBoard. You can register a total of 64 Performances (8 sounds x 8banks) as favorite Performance.Selecting a PartThe currently selected part is called the “current part.”1. From the Layer screen, Use or to select the part.The selected part is indicated by “ .”fig.08-007_50For details on selecting a favorite performance, refer to“Selecting Favorite Performances” (p. 100).1. Select the Performance that you wish to register (p. 99).2. Press [F5 (Perf List)].100