SCSI Primary Commands - 2.pdf

More documents

Recommendations

Info

T10/1236-D Revision 20 18 July 2001The DESCRIPTOR LENGTH field shall contain the length in bytes of the fields that follow the DESCRIPTOR LENGTH field,including the embedded data. The value in the DESCRIPTOR LENGTH field shall be a multiple of 4.The DESTINATION TARGET DESCRIPTOR INDEX field is described in 7.2.7.1.The STREAM DEVICE TRANSFER LENGTH field specifies the amount of data to be written to the stream device on eachwrite operation. See 7.2.6.8 for a description of how data in the STREAM DEVICE TRANSFER LENGTH field in thesegment descriptor interacts with data in the STREAM BLOCK LENGTH field in the device type specific targetdescriptor parameters for the destination sequential-access device type.The EMBEDDED DATA NUMBER OF BYTES field specifies the number of bytes of embedded data that are to be transferredto the stream device. A value of zero shall not be considered an error. The EMBEDDED DATA NUMBER OFBYTES value shall be less than or equal to the DESCRIPTOR LENGTH value minus 12.7.2.7.9 Stream device to discard operationThe segment descriptor format shown in table 36 instructs the copy manager to read data from a stream deviceand not copy it to any destination device.Table 36 — Stream device to discard segment descriptorBitByte7 6 5 4 3 2 1 00 DESCRIPTOR TYPE CODE (06h or 0Fh)1 Reserved CAT2 (MSB)DESCRIPTOR LENGTH (000Ch)3 (LSB)4 (MSB)SOURCE TARGET DESCRIPTOR INDEX5 (LSB)6 Reserved7 Reserved8 Reserved9 (MSB)10STREAM DEVICE TRANSFER LENGTH11 (LSB)12 (MSB)NUMBER OF BYTES15 (LSB)The DESCRIPTOR TYPE CODE field is described in 7.2.5 and 7.2.7.1. Two DESCRIPTOR TYPE CODE values use thesegment descriptor format shown in table 36 and described in this subclause.For descriptor type code 06h (stream→discard) or descriptor type code 0Fh (stream→discard+application client),the copy manager shall read data as necessary from the source stream device identified by the SOURCE TARGETDESCRIPTOR INDEX field starting at the current position of the source stream device. The number of bytes indicatedby the NUMBER OF BYTES field shall be removed from the source data, starting with any residual source data fromthe previous segment.70 dpANS SCSI Primary Commands - 2 (SPC-2)
18 July 2001 T10/1236-D Revision 20For descriptor type code 06h (stream→discard) the removed data shall be discarded and not written to any destinationdevice. For descriptor type code 0Fh (stream→discard+application client) the removed data shall be heldfor delivery to the application client upon completion of the EXTENDED COPY command in response to aRECEIVE COPY RESULTS command with RECEIVE DATA service action as described in 7.14.3. The minimumamount of held data supported by the copy manager is returned in the response data for the RECEIVE COPYRESULTS command with OPERATING PARAMETERS service action (see 7.14.4). If the copy manager supportsthe 0Fh (stream→discard+application client) descriptor type code it also shall support the RECEIVE COPYRESULTS command with RECEIVE DATA service action.The CAT bit is described in 7.2.7.2.The DESCRIPTOR LENGTH field shall contain 12 (000Ch). The DESTINATION TARGET DESCRIPTOR INDEX field isdescribed in 7.2.7.1.The SOURCE STREAM DEVICE TRANSFER LENGTH field specifies the amount of data to be read from the source streamdevice on each read operation. See 7.2.6.8 for a description of how data in the SOURCE STREAM DEVICE TRANSFERLENGTH field in the segment descriptor interacts with data in the STREAM BLOCK LENGTH field in the device typespecific target descriptor parameters for the source sequential-access device type.The NUMBER OF BYTES field specifies the number of bytes to be removed from the source data.7.2.7.10 Verify device operationThe segment descriptor format shown in table 37 instructs the copy manager to verify the accessibility of a SCSIdevice.Table 37 — Verify device operation segment descriptorBitByte7 6 5 4 3 2 1 00 DESCRIPTOR TYPE CODE (07h)1 Reserved2 (MSB)DESCRIPTOR LENGTH (0008h)3 (LSB)4 (MSB)SOURCE TARGET DESCRIPTOR INDEX5 (LSB)67Reserved8 Reserved TUR911ReservedThe DESCRIPTOR TYPE CODE field is described in 7.2.5 and 7.2.7.1. Descriptor type code 07h instructs the copymanager to verify the accessibility of the device identified by the SOURCE TARGET DESCRIPTOR INDEX field.The DESCRIPTOR LENGTH field shall contain 8 (0008h). The SOURCE TARGET DESCRIPTOR INDEX field is described in7.2.7.1.dpANS SCSI Primary Commands - 2 (SPC-2) 71
Page 1 and 2:
dpANSProjectT10/1236-DRevision 2018
Page 3:
DraftANSI (r)NCITS.351:200xAmerican
Page 6 and 7:
T10/1236-D Revision 20 18 July 2001
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39: T10/1236-D Revision 20 18 July 2001
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
show all

SCSI Primary Commands - 2.pdf

Create successful ePaper yourself

Delete template?

Save as template?