SCSI Primary Commands - 2.pdf

18 July 2001 T10/1236-D Revision 20C.6 Version Descriptor ValuesTable C.5 is a numerical order listing of the version descriptor values used in the standard INQUIRY data. Eachversion descriptor value is computed from a coded value identifying the standard and a coded value representingthe revision of the standard. The formula is ((standard*32)+revison). Table C.5 shows all three code values andthe associated standard name. The version descriptor code is shown in both decimal and hexadecimal.Table C.5 — Version descriptor assignments (part 1 of 5)StandardCodeRevisionCodeVersionDescriptor Code(decimal | hex)Standard0 0 0 | 0000h Version Descriptor Not Supported or No Standard Identified1 0 32 | 0020h SAM (no version claimed)1 27 59 | 003Bh SAM T10/0994 revision 181 28 60 | 003Ch SAM ANSI X3.270:19962 0 64 | 0040h SAM-2 (no version claimed)9 0 288 | 0120h SPC (no version claimed)9 27 315 | 013Bh SPC T10/0995 revision 11a9 28 316 | 013Ch SPC ANSI X3.301:199710 0 320 | 0140h MMC (no version claimed)10 27 347 | 015Bh MMC T10/1048 revision 10a10 28 348 | 015Ch MMC ANSI X3.304:199711 0 352 | 0160h SCC (no version claimed)11 27 379 | 017Bh SCC T10/1047 revision 06c11 28 380 | 017Ch SCC ANSI X3.276:199712 0 384 | 0180h SBC (no version claimed)12 27 411 | 019Bh SBC T10/0996 revision 08c12 28 412 | 019Ch SBC ANSI NCITS.306:199813 0 416 | 01A0h SMC (no version claimed)13 27 443 | 01BBh SMC T10/0999 revision 10a13 28 444 | 01BCh SMC ANSI NCITS.314:199814 0 448 | 01C0h SES (no version claimed)14 27 475 | 01DBh SES T10/1212 revision 08b14 28 476 | 01DCh SES ANSI NCITS.305:199814 29 477 | 01DDh SES T10/1212 revision 08bw/ Amendment ANSI NCITS.305/AM1:2000dpANS SCSI Primary Commands - 2 (SPC-2) 259