SCSI Primary Commands - 2.pdf

T10/1236-D Revision 20 18 July 2001Table A.3 lists all possible save options for the LOG SENSE command.The listed options define the save operations that occur as a direct result of the LOG SENSE command. Furthersave operations are a function of the TSD bit in the log parameter control byte.Table A.3 — LOG SENSE save optionsLOG SENSECDB ValuesLog Page ParameterControl Byte ValueSPbitPCfieldDSbitLPbitLBINbitDevice Server Action0 xx x x x Do not save any of the log parameters into nonvolatile storage.1 00 0 0 x Save all the current threshold values of the selected log pageinto nonvolatile storage.1 01 0 0 x Save all the current cumulative values of the selected log pageinto nonvolatile storage.1 10 0 0 x Save all the default threshold values of the selected log pageinto nonvolatile storage.1 11 0 0 x Save all the default cumulative values of the selected log pageinto nonvolatile storage.1 xx 0 1 0 Save all the current list parameter values of the selected logpage into nonvolatile storage. The list parameters areformatted as ASCII graphic codes.1 xx 0 1 1 Save all the current list parameter values of the selected logpage into nonvolatile storage. The list parameters areformatted in binary.1 xx 1 x x Do not save any of the log parameters into nonvolatile storage.222 dpANS SCSI Primary Commands - 2 (SPC-2)