SCSI Primary Commands - 2.pdf

18 July 2001 T10/1236-D Revision 209 Commands for processor type devices9.1 Summary of commands for processor type devicesThe commands for processor type devices shall be as listed in table 179.Command nameTable 179 — Commands for processor devicesOperationcode Type ReferenceObsolete 40h OBObsolete 39h OBObsolete 18h OBObsolete 3Ah OBEXTENDED COPY 83h O 7.2INQUIRY 12h M 7.3LOG SELECT 4Ch O 7.4LOG SENSE 4Dh O 7.5PERSISTENT RESERVE IN 5Eh O 7.10PERSISTENT RESERVE OUT 5Fh O 7.11READ BUFFER 3Ch O 7.13RECEIVE 08h O 9.2RECEIVE COPY RESULTS 84h O 7.14RECEIVE DIAGNOSTIC RESULTS 1Ch O 7.15RELEASE(10) 57h O 7.16RELEASE(6) 17h O 7.17REPORT LUNS A0h O 7.19REQUEST SENSE 03h M 7.20RESERVE(10) 56h O 7.21RESERVE(6) 16h O 7.22SEND 0Ah O 9.3SEND DIAGNOSTIC 1Dh M 7.23TEST UNIT READY 00h M 7.24WRITE BUFFER 3Bh O 7.26Key: M = Command implementation is mandatory.O = Command implementation is optional.OB = Command implementation is defined in a previous standardThe following operation codes are vendor specific: 02h, 05h, 06h, 09h, 0Ch, 0Dh, 0Eh, 0Fh, 10h, 11h, 13h, 14h,19h, C0h through FFh. All remaining operation codes for processor devices are reserved.dpANS SCSI Primary Commands - 2 (SPC-2) 215