SCSI Primary Commands - 2.pdf

18 July 2001 T10/1236-D Revision 20The SEGMENTS PROCESSED field contains the number of segments the copy manager has processed for theEXTENDED COPY command identified by the LIST IDENTIFIER field in the CDB including the segment currentlybeing processed. This field shall be zero if the copy manager has not yet begun processing segment descriptors.The TRANSFER COUNT UNITS field specifies the units for the TRANSFER COUNT field as defined in table 89.Table 89 — COPY STATUS TRANSFER COUNT UNITS valuesValue Meaning BinaryMultiplierName aMultiplier to convertTRANSFER COUNT fieldto bytes00h Bytes 101h Ki-bytes Kilobinary 2 10 or 102402h Mi-bytes Megabinary 2 2003h Gi-bytes Giagbinary 2 3004h Ti-bytes Terabinary 2 4005h Pi-bytes Petabinary 2 5006h Ei-bytes Exabinary 2 6007h - FFhaReservedThis nomenclature is defined in ISO/IEC 60027-2-am2(1999-01), Letter symbols to be used in electrical technology -Part 2: Telecommunications and electronics (Amendment 2).The TRANSFER COUNT field specifies the amount of data written to a destination device for the EXTENDED COPYcommand identified by the LIST IDENTIFIER field in the CDB prior to receiving the RECEIVE COPY RESULTScommand with COPY STATUS service action.dpANS SCSI Primary Commands - 2 (SPC-2) 121