HCS 2.4/3.0. The countersinkable compression screw.

More documents

Recommendations

Info

Instruments HCS 2.4292.623 Guide Wire 1.1 mm with trocar tiplength 150 mm, Stainless Steel312.151 Double Drill Guide 2.0/1.1For protecting soft tissue during insertionof guide wires and predrilling03.226.002 Direct Measuring Device for HCSFor determining the appropriate screwlength310.221 Drill Bit 2.0/1.15 mm, cannulated,length 150/48 mm, 3-flute, for QuickCouplingFor predrilling03.226.016 Compression Sleeve for HCS – HeadlessCompression Screw 2.4 mmFor closing the fracture gap andcompressing the bone fragments03.226.006 Handle for Compression Sleeve for HCS311.430 Handle with Quick Coupling,length 110 mmFor Stardrive T8 Screwdriver Shafts(03.226.004 and 314.467)03.226.004 Screwdriver Shaft, cannulated, Stardrive,T8, with coloured marking, for HCS –Headless Compression Screw 3.0 mmFor countersinking the screw; with colormarkings to control countersink depth16 Synthes HCS 2.4/3.0 Instructions for Use
314.467 Screwdriver Shaft, Stardrive T8,self-holdingFor screw extraction; with self-retaining tip319.970 Screw Forceps, self-holding, length 85 mm319.292 Cleaning Stylet 1.1 mmFor cleaning cannulated instrumentsduring surgery319.291 Cleaning Brush 1.25 mmFor postoperative cleaning of cannulatedinstrumentsSynthes 17
Page 1: Instructions for UseHCS 2.4/3.0. Th
Page 4 and 5: Features and BenefitsSelf-drilling
Page 6 and 7: IndicationsFixation of intra-articu
Page 8 and 9: Surgical Technique for HCS 2.4/3.01
Page 14 and 15: Surgical Technique for HCS 2.4/3.0C
Page 16 and 17: Implants HCS 2.4HCS 2.4 mm - Headle
Page 20 and 21: Setlist HCS 2.4Instrument Set for H
Page 22 and 23: Implants HCS 3.0HCS 3.0 mm - Headle
Page 24 and 25: 03.226.006 Handle for Compression S
Page 26: 24 Synthes HCS 2.4/3.0 Instructions

HCS 2.4/3.0. The countersinkable compression screw.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?