HCS 2.4/3.0. The countersinkable compression screw.
HCS 2.4/3.0. The countersinkable compression screw.
HCS 2.4/3.0. The countersinkable compression screw.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Screw ExtractionInstruments314.467 Screwdriver Shaft, Stardrive, T8,orself-holding03.226.004 Screwdriver Shaft, cannulated,Stardrive, T8, with colored marking,for <strong>HCS</strong>311.430 Handle with Quick Coupling,length 110 mmFor <strong>HCS</strong> <strong>2.4</strong>03.226.016 Compression Sleeve for <strong>HCS</strong> – HeadlessCompression Screw <strong>2.4</strong> mmFor <strong>HCS</strong> 3.003.226.000 Compression Sleeve for <strong>HCS</strong> – HeadlessCompression Screw 3.0 mmFor the extraction of the <strong>HCS</strong> use a Stardrive <strong>screw</strong>driver orScrewdriver Shaft in combination with the handle.If the <strong>screw</strong> strips, use the following procedure:Twist the <strong>compression</strong> sleeve over the head thread and insertthe <strong>screw</strong>driver through the <strong>compression</strong> sleeve into theStardrive recess of the <strong>screw</strong>.Remove the <strong>screw</strong> by simultaneously pulling on the <strong>compression</strong>sleeve and turning both the <strong>screw</strong>driver and the <strong>compression</strong>sleeve in counterclockwise direction.Note: If necessary, expose the recess and part of the headthread with a hollow reamer (e.g. 309.035) or preferredmethod.Synthes 13