HCS 2.4/3.0. The countersinkable compression screw.

More documents

Recommendations

Info

Surgical Technique for HCS 2.4/3.0Color markingsThe color markings on the screwdriver shaft show the positionof the screwdriver tip and the head thread of the screw.Green mark at the top end of thecompression sleeveThe screwdriver tip is seated correctlyin the Stardrvie recess of the screw.Yellow mark at the top end of thecompression sleeveThe top end of the head thread is evenwith the bone surface.Note: If the screw is inserted at an angle,it must be countersunk furtherthan the yellow mark so that it doesnot project from surface.Red mark at the top end of thecompression sleeveThe top end of the head thread isapproximately 2 mm below the bonesurface.12 Synthes HCS 2.4/3.0 Instructions for Use
Screw ExtractionInstruments314.467 Screwdriver Shaft, Stardrive, T8,orself-holding03.226.004 Screwdriver Shaft, cannulated,Stardrive, T8, with colored marking,for HCS311.430 Handle with Quick Coupling,length 110 mmFor HCS 2.403.226.016 Compression Sleeve for HCS – HeadlessCompression Screw 2.4 mmFor HCS 3.003.226.000 Compression Sleeve for HCS – HeadlessCompression Screw 3.0 mmFor the extraction of the HCS use a Stardrive screwdriver orScrewdriver Shaft in combination with the handle.If the screw strips, use the following procedure:Twist the compression sleeve over the head thread and insertthe screwdriver through the compression sleeve into theStardrive recess of the screw.Remove the screw by simultaneously pulling on the compressionsleeve and turning both the screwdriver and the compressionsleeve in counterclockwise direction.Note: If necessary, expose the recess and part of the headthread with a hollow reamer (e.g. 309.035) or preferredmethod.Synthes 13
Page 1: Instructions for UseHCS 2.4/3.0. Th
Page 4 and 5: Features and BenefitsSelf-drilling
Page 6 and 7: IndicationsFixation of intra-articu
Page 8 and 9: Surgical Technique for HCS 2.4/3.01
Page 16 and 17: Implants HCS 2.4HCS 2.4 mm - Headle
Page 18 and 19: Instruments HCS 2.4292.623 Guide Wi
Page 20 and 21: Setlist HCS 2.4Instrument Set for H
Page 22 and 23: Implants HCS 3.0HCS 3.0 mm - Headle
Page 24 and 25: 03.226.006 Handle for Compression S
Page 26: 24 Synthes HCS 2.4/3.0 Instructions

HCS 2.4/3.0. The countersinkable compression screw.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?