HCS 2.4/3.0. The countersinkable compression screw.
HCS 2.4/3.0. The countersinkable compression screw.
HCS 2.4/3.0. The countersinkable compression screw.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6Countersink <strong>screw</strong>Instruments03.226.004 Screwdriver Shaft, cannulated,Stardrive, T8, with colored marking,for <strong>HCS</strong>311.430 Handle with Quick Coupling,length 110 mmFor <strong>HCS</strong> <strong>2.4</strong>03.226.016 Compression Sleeve for <strong>HCS</strong> – HeadlessCompression Screw <strong>2.4</strong> mmFor <strong>HCS</strong> 3.003.226.000 Compression Sleeve for <strong>HCS</strong> – HeadlessCompression Screw 3.0 mmRemove the <strong>compression</strong> sleeve handle and slide the cannulated<strong>screw</strong>driver through the <strong>compression</strong> sleeve.Countersink the <strong>screw</strong> by turning the <strong>screw</strong>driver shaft whilesimultaneously holding the <strong>compression</strong> sleeve stationary.Verify the <strong>screw</strong> position with the image intensifier. Ensurethat the <strong>screw</strong> tip does not penetrate the distal cortex.Remove and dispose of the guide wire.Synthes 11