HCS 2.4/3.0. The countersinkable compression screw.

More documents

Recommendations

Info

Surgical Technique for HCS 2.4/3.03PredrillingInstruments310.221 Drill Bit 2.0/1.15 mm, cannulated,length 150/48 mm, 3-flute, for QuickCoupling312.151 Double Drill Guide 2.0/1.1Predrilling makes it substantially easier to insert the screw indense bone.Slide the drill guide with the drill bit over the guide wire andpre-drill to the desired depth.Remove the drill guide and verify the effective drilling depthwith the image intensifier.Note: Do not drill beyond the tip of the guide wire. Slowlypull the drill bit straight out while running the power tool in“forward mode” to ensure that the guide wire stays in place.8 Synthes HCS 2.4/3.0 Instructions for Use
4Pick up screwInstrumentFor HCS 2.403.226.016 Compression Sleeve for HCS – HeadlessCompression Screw 2.4 mmFor HCS 3.003.226.000 Compression Sleeve for HCS – HeadlessCompression Screw 3.0 mmTwist the compression sleeve over the head thread of thescrew to remove the screw from the screw rack.Synthes 9
Page 1: Instructions for UseHCS 2.4/3.0. Th
Page 4 and 5: Features and BenefitsSelf-drilling
Page 6 and 7: IndicationsFixation of intra-articu
Page 8 and 9: Surgical Technique for HCS 2.4/3.01
Page 12 and 13: Surgical Technique for HCS 2.4/3.05
Page 14 and 15: Surgical Technique for HCS 2.4/3.0C
Page 16 and 17: Implants HCS 2.4HCS 2.4 mm - Headle
Page 18 and 19: Instruments HCS 2.4292.623 Guide Wi
Page 20 and 21: Setlist HCS 2.4Instrument Set for H
Page 22 and 23: Implants HCS 3.0HCS 3.0 mm - Headle
Page 24 and 25: 03.226.006 Handle for Compression S
Page 26: 24 Synthes HCS 2.4/3.0 Instructions

HCS 2.4/3.0. The countersinkable compression screw.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?