Sleeve valveS - Premier Valves

More documents

Recommendations

Info

2 premier sleeve valvesIntroduction1. Premier Valves has for the past 20 yearshad the backing of Von Roll, who has beenmanufacturing Sleeve Valves for more than 70years. The current design of the IES/Von RollSleeve Valve is a combination of efforts by VonRoll (Switzerland), the Department of WaterAffairs and Forestry (South Africa) and IESValves (South Africa). Premier Valves has beensupplying these Sleeve Valves locally since 1987.Sleeve valves are used as discharge regulatingvalves on dam outlets, pump stations andhydropower schemes.The illustrations in this catalogue are subject to modifications without notice.premierP.O. Box 11735, Randhart, South Africa, 1457sales@premiervalves.co.zavalves (Pty) LtdT +2711-908-3760 F +2711-908-1268www.premiervalves.co.za
premier sleeve valves32. Sleeve Valve ConstructionClosedOpenFigure 2.1: SmallSleeve Valveon Dam Outlet(HydraulicallyOperated2.1 Small Sleeve Valves (100 - 300)Small Sleeve valves have a stainless steel body and an aluminiumbronze sleeve. Linkages are 3CR12 (or stainless steel can bespecified). All dissimilar metals are insulated to limit any galvanicattack.Sealing of the sleeve valve is achieved by a front seal and two rearseals. The front seal is a large o-ring clamped in position by astainless steel clamping ring to prevent it being removed by highvelocity water. The rear seals are smaller o-rings housed in the valvebody (see figure 2.3). The use of o-rings allows users to purchasespare seals virtually anywhere.The aluminium bronze sleeve is greased between the back seals (seefigure 2.3).Small sleeve valves can be operated hydraulically (as shown in figure2.1), manually (from a pedestal or as specified by the customer)or by Electric Actuator. Alternate means of operation can beaccommodated, please submit details of your requirements to ourEngineering Department.Position indication can be provided by means of a cable and weightarrangement or by means of an electronic positioning system. If thevalve is operated hydraulically the electronic positioning system canbe mounted inside the hydraulic cylinder. The electronic positioningsystem has a digital display were the valve position can be read.The illustrations in this catalogue are subject to modifications without notice.premierP.O. Box 11735, Randhart, South Africa, 1457sales@premiervalves.co.zavalves (Pty) LtdT +2711-908-3760 F +2711-908-1268www.premiervalves.co.za
Page 1: Gate Valves1SleeveValvespremier val
Page 6 and 7: 6premier sleeve valves5. Headloss C

Sleeve valveS - Premier Valves

Create successful ePaper yourself

Delete template?

Save as template?