27998R - SLx 5.8 Ghz AV Sender - Philex

PROBLEM CAUSE ACTIONAll the availablescart sockets arebeing usedInfra red remotecontrol does notfunctionEquipment has insufficientscart socketsInfra-Red Eyes set upincorrectlySunlight or high outputlighting is blocking the SignalIncorrect Remote usedInfra red Transmitter orreceiver signal is obstructedDifficulty finding the Infra redsensor on the TransmittingEquipment (DVD, Satellite etc)Intermittent or no Infra redoperationCable Box which use IRDARemote controlsPurchase an unswitched scart splitterfor the transmitting equipment and/or aswitched scart selector for the receivingequipmentConnect equipment using other connectortype e.g. Coax flyleadInfra red transmitting and/or receiving eyesare not positioned correctly (See Step 8)Block the excessive lightUse Original or compatible Remote controlsRemove obstruction and position the Infrared eyes for a better signal(See Figs 4 and 8) and use a second personaiming the remote control at the AV Receiverwhile the first person moves the Infra redeyes in front of the Transmitting EquipmentCheck that the Infra red leads are correctlyinserted into the Infra red Socket(s)Check the remote works directly with theTransmitting equipment and that the batteriesare not dischargedSome cable boxes use an IRDA remotecontrol system these will not work with youAV sender (Contact your Cable supplier tosee if your box uses IRDAPage 7

For further information or any queries, please contactPhilex Customer Careline: 08457 573 479(Local rate – UK only)Technical Support: technical@philex.com1856Declaration of Conformity available at:http://technical.philex.comWaste electrical products shouldnot be disposed of with householdwaste. Please recycle wherefacilities exist. Check with your LocalAuthority . for recycling advicePage 8© Philex Electronic Ltd. 2008 v1.1