EN / ACS800-31/U31 Hardware Manual - Simark Controls
EN / ACS800-31/U31 Hardware Manual - Simark Controls
EN / ACS800-31/U31 Hardware Manual - Simark Controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
72Connect the AGPS board as follows:• Remove the enclosure cover by undoing the fixing screws (1).• Ground the bottom plate of the enclosure or via terminal X1:1 of the AGPS board.• Connect the cable delivered with the kit between terminal block X2 of the AGPSboard (2) and drive terminal block X41.• Connect a cable between connector X1 of the AGPS board (3) and the115...230 V source.• Fasten the enclosure cover back with screws.12X2X1115...230 V3Installation of AGPS board (Prevention of Unexpected Start, +Q950)