EN / ACS800-31/U31 Hardware Manual - Simark Controls
EN / ACS800-31/U31 Hardware Manual - Simark Controls
EN / ACS800-31/U31 Hardware Manual - Simark Controls
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30Connection diagram of the RMIO board in the line-side converterInternal connections to the RMIO board for the <strong>ACS800</strong> IGBT Supply ControlProgram are shown below. Do not change the connections.Terminal block size:cables 0.3 to 3.3 mm 2 (22 to 12 AWG)Tightening torque:0.2 to 0.4 Nm (2 to 4 lbf in.)1) non-programmable I/O2) External earth (ground) faultindication via digital input DI4: Seeparameter 30.04 EXT EARTH FAULT.3) External alarm/fault indication viadigital input DI5: See parameter 30.05EXT EV<strong>EN</strong>T.X201 VREF- Reference voltage -10 VDC,2 GND 1kohm